DVD RECORDER MODEL DV-RW2U OPERATION MANUAL OPEN/CLOSE POWER CHANNEL TIMER ON/OFF REC STANDBY DISC TIMER TIMER AV AUTO REC DISC IN 1 • The region number for this recorder is 1 IMPORTANT / IMPORTANTE EZ SET UP (AUTO CHANNEL /CLOCK SET UP) EZ SET UP (PROGRAMACIÓN AUTOMÁTICA DE 1 Connect Antenna/Cable to recorder first. En primer lugar conecte la antena/el cable a el producto. 2 Then, plug into AC Power Outlet. A continuación, enchúfelos al tomacorriente de CA.
For future reference, record the model and serial number (located on the rear of the product) in the space provided. Model No.: ———————————— DV-RW2U Serial No.: ———————————— WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFEGUARDS CAUTION: Please read all of these instructions before you operate this product and save these instructions for later use. ANTENNA LEAD-IN WIRE Electrical energy can perform many useful functions. This product has been engineered and manufactured to assure your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS.
Contents IMPORTANT SAFEGUARDS ....................... 3 Features ....................................................... 6 Accessories ................................................. 6 About Discs ................................................. 7 Types of Discs that Can Be Played on This Recorder ... Discs that Cannot be Played .......................................... 7 7 About Recording ......................................... 9 Recording Format ..........................................
Contents Simple Recording Timer ............................. 51 Changing the Settings of the Simple Recording Timer .. Cancelling the Simple Recording Timer ......................... 51 51 Timer Recording with VCR Plus+® System ...................................................... 53 Timer Recording .......................................... 54 Disc Timer Recording ................................. 56 Canceling the Disc Timer Recording ..............................
Features Playback Function Edit Function • Powerful sound comparable to a movie theater Connecting this recorder to an AV amplifier compatible with Dolby Digital or DTS lets you enjoy powerful Surround sound filled with a sense of presence. • Find what you want to watch quickly and easily Unlike video tape, you can jump right to the part of a DVD disc that you want to watch without having to fast forward and rewind. You can also search for the scene you want to watch both quickly and easily.
About Discs Types of Discs that Can Be Played on This Recorder • The following discs can be played back and recorded with this recorder. Do not use an 8 cm (3") adapter (for CDs). • Since this recorder is compatible with the NTSC format, use discs that contain the letters “NTSC” on the disc or package. • Use discs that are compatible with standards as indicated by the presence of the following logo marks on the disc label. Playback of discs not complying with these standards is not guaranteed.
About Discs ■ Discs with unusual shapes cannot be played. • Discs with unusual shapes (heart-shaped or hexagonal discs,etc.) cannot be used. The use of such discs will cause a fault. *3 About MP3 file format MP3 files are audio data compressed in MPEG1 Audio layer 3 file format. “MP3 files” have “.mp3” as extensions. (Some files that have “.mp3” extensinos or files that have not been recorded in MP3 format will produce noise or cannot be played.
About Recording Recording Format • There are two recording formats available with this recorder consisting of the VR mode and Video mode. • The recording format that can be selected may differ depending on the disc. Refer to the section on Discs and Recording Formats. Discs and Recording Formats • DVD-RW and DVD-R discs can be recorded with this recorder. The recording format that can be selected may vary according to the disc version and types of disc.
About Recording Recording Time • The recording mode that can be set varies according to the recording format. Refer to the table below for the applicable recording mode.
About Recording Using the Proper Disc Unrecordable Material Select the disc used and recording format according to the objective of the recording. Select the disc and recording format by referring to the table below.
Initialization and Finalization Initialization (Format) Initialization is required when using DVD-RW discs in the Video mode. (See page 88 for details about Initialization) When an unused DVD-RW disc is placed in the recorder immediately after it has been purchased, the recorder is set to automatically begin initializing in the VR mode. The settings can also be changed so that discs are initialized in the Video mode (page 86).
About the Contents of the Disc Icons Used on DVD Video Disc Case When you buy a DVD Video disc, the back of the disc case ususally contains various information about the contents of the disc. 1 2 2 1. English 2. Chinese 3 2 4 16:9 LB 1. English 2. Chinese 5 123 456 2 1 Audio tracks and audio formats DVD discs can contain up to 8 separate tracks with a different language on each. The first in the list is the original track.
Precautions During Use Disc Precautions Proper Disc Storage Place the disc in the center of the disc case and store the case and disc upright. Avoid storing discs in locations subject to direct sunlight, next to heating appliances or in locations of high humidity. Do not drop discs or subject them to strong vibrations or impacts. Avoid storing discs in locations where there are large amounts of dust or locations where mold tends to grow easily.
Major Components Main Unit (Front) 2 1 3 OPEN/CLOSE POWER 4 5 6 CHANNEL TIMER ON/OFF REC DV IN/OUT S-VIDEO VIDEO L(MONO)-AUDIO-R RESET 9 STANDBY TIMER AV AUTO REC SKIP DISC IN 78 1 2 3 4 5 6 7 8 9 LINE IN 2 DISC TIMER q we r t 0 0 q w e r t y u i POWER (P.29) Disc tray (P.29) OPEN/CLOSE (P.29) CHANNEL / (P.24) TIMER ON/OFF (P.52) REC (P.48) RESET (P.101) DV IN/OUT terminal (P.
Major Components Main Unit (Rear) LINE R-AUDIO-L VIDEO S-VIDEO IN FROM ANTENNA COMPONENT OUT (480I/480P) IN 1 AUTO REC Y VHF/UHF/CATV DIGITAL OUT OPTICAL IN 3 PB OUT PR OUT TO TV To an AC outlet 1 LINE R-AUDIO-L 2 VIDEO S-VIDEO 3 IN FROM ANTENNA COMPONENT OUT (480I/480P) IN 1 AUTO REC Y IN 3 PB OUT PR VHF/UHF/CATV DIGITAL OUT OPTICAL OUT TO TV 7 45 6 1 LINE IN 1 (AUTO REC) · AUDIO input jacks · VIDEO input jack · S-VIDEO input jack 2 COMPONENT VIDEO output jacks (P.
Major Components Remote Control Unit Operating Renge of Remote Control o p 1 2 OPEN/CL POWER POWER 3 4 5 6 7 8 9 TIMER ON/OFF DISC TIMER DNR a s d f INPUT ZOOM MENU TITLE SET/ ENTER RETURN TIMER PROG. REC MODE q w AM/PM ERASE PROGRAM 100 REV FWD e PLAY REC STILL/PAUSE r STOP SKIP SEARCH t y u i F.ADV SKIP SLOW ON ORIGINAL/ DISPLAY SCREEN PLAY LIST POWER INPUT DISC TIMER TIMER AV AUTO REC About 30° About 30° Front 22.96ft.
Major Components POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN Operating a TV Using the Remote Control (Universal Remote Control) The Universal Remote Control may operate the basic functions of 21 different types of TVs. To enter the Manufacturer’s Code for your TV, follow the instructions below. There is no guarantee that the universal remote control will function with your TV. VCR PLUS+ TIMER PROG.
Basic Conneciton 1 Easy Connection cable to the IN FROM The following connection is the basic connection to watch or record TV programs. To use cable box or satellite receiver, see “CATV or Satellite Receiver Connections” on page 21. Important! • This recorder is equipped with copy protection technology. The playback picture from this recorder will not appear correctly on your TV when you connect this recorder to your TV via a VCR (or your VCR via this recorder) using Video/Audio cables.
Basic Conneciton Using Other Types of Video Output In order to view clearer DVD images, it is recommended that you use a commercially available S-Video or component video cable when connecting your TV to the video output. Connecting Using an S-Video Output Connect the S-VIDEO output jack on this recorder to the S- TV VIDEO input jack on your TV using a S-VIDEO cable (Commercially available).
CATV or Satellite Receiver Connections Connecting to a Cable Box or Satellite Receiver (1) 1 and coaxial cables as The following connection is the connection to a cable box or satellite receiver when receiving only a few scrambled channels. When many or all the channels are scrambled, see the connection on the next page. Using this connection, you can: • Record unscrambled CATV signals by selecting them on this recorder.
CATV or Satellite Receiver Connections Connecting to a Cable Box or Satellite Receiver (2) 1 Connect the TV antenna The following connection is the connection to a cable box or satellite receiver when receiving many or all the channels are scrambled. and coaxial cables as Using this connection, you can: • Record any CATV signals by selecting them the cable box or satellite receiver. • Record using AV AUTO REC function. You can watch and record the TV channels. shown on the left.
EZ Set Up Important! (Caution during EZ Set Up): • Do not press POWER on the recorder or remote control. OPEN/CLOSE POWER CHANNEL TIMER ON/OFF REC STANDBY DISC TIMER TIMER AV AUTO REC DISC IN The EZ Set Up function automatically sets the tuner channels and clock when the antenna cable is connected to the rear of the recorder and the power plug is then connected to an AC outlet. POWER Important! When using a cable box: • See “CATV or Satellite Receiver Connections” on page 21.
Channel Setting Channel Setting POWER TIMER ON/OFF DISC TIMER OPEN/ CLOSE CH ANGLE AUDIO SETUP/ FUNCTION DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ TIMER PROG. REC MODE ERASE PROGRAM AM/PM 100 REV This recorder can receive a maximum of 181 channels as shown below by presetting the channels into memory. (VHF: 2 to 13, UHF: 14 to 69, CATV: 1 to 125) Important! When you use the recorder for the first time, press SETUP/FUNCTION. “OSD LANGUAGE SETUP” screen appears.
Clock Setting Auto Clock Setting POWER TIMER ON/OFF DISC TIMER OPEN/ CLOSE CH ANGLE AUDIO SETUP/ FUNCTION DNR MENU SET/ ENTER RETURN VCR PLUS+ TIMER PROG. REC MODE ERASE PROGRAM 100 REV Important! When using a cable box: • See “CATV or Satellite Receiver Connections” on page 21. • Leave POWER on the cable box turned on and select a channel that carries EDS signals. 1 FWD EDS CH SET EDS CH Press SETUP/FUNCTION. Press ' / " to select “CLOCK” and 6 F.
Clock Setting Manual Clock Setting POWER TIMER ON/OFF DISC TIMER OPEN/ CLOSE 1 CH ANGLE AUDIO SETUP/ FUNCTION DNR MENU screen appears. Press ' / INPUT ZOOM " to select “CLOCK” and then MENU TITLE press SET/ENTER. SET/ ENTER RETURN Press SETUP/FUNCTION. The VCR PLUS+ CLOCK TIMER PROG. AUTO MANUAL REC MODE AM/PM ERASE PROGRAM 100 REV 2 and then press SET/ENTER.
OSD Language Setting 1 POWER TIMER ON/OFF DISC TIMER OPEN/ CLOSE Press SETUP/FUNCTION to display the MENU screen. CH ANGLE AUDIO SETUP/ FUNCTION DNR SETUP PLAYBACK RECORD DISC CLOCK CHANNEL OPTION OSD LANGUAGE SELECT ENTER ENTER INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ RETURN TIMER PROG. REC MODE AM/PM ERASE PROGRAM 100 REV FWD PLAY REC STILL/PAUSE STOP SKIP SEARCH F.
Display Information POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR INPUT ZOOM MENU TITLE Change the Display on the TV Screen Each time ON SCREEN on the remote control unit is pressed, the display on the TV screen changes the mode in the following sequence: AUTO SET/ ENTER RETURN ON Change the Display on the Front Panel Display Each time DISPLAY on the remote control unit is pressed, the Front Panel Display changes the mode in the following sequence: OFF OPEN/CLO
Playback POWER TIMER ON/OFF CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DISC TIMER DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN DVD Playback Playback the playback-only discs DVD VIDEO 1 VCR PLUS+ channel to the external “VIDEO” TIMER PROG. or “AV” channel connected to the REC MODE AM/PM ERASE PROGRAM 100 REV VIDEO/AUDIO output jacks. 2 FWD PLAY REC STILL/PAUSE 3 F.ADV SKIP INPUT This recorder stores the location where you stopped the disc.
Playback Selected Title Playback POWER TIMER ON/OFF DISC TIMER 2 Press TITLE or MENU. • DiscNavi Title List screen appears. OPEN/ CLOSE DVD VIDEO Title number CH ANGLE AUDIO SETUP/ FUNCTION ZOOM INPUT DNR MENU TITLE 1 2 SET/ ENTER RETURN VCR PLUS+ DISCNAVI(ORG) 1 2 Press ZOOM during stop mode. PAGE 1/ 2 3 Title screen Press number buttons to enter the 4 5 6 title number. 3 1/ 0 2 Press SET/ENTER. 3:42AM CH SELECT ENTER ENTER 2 SP RETURN • Selected title is played back.
Playback POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ TIMER PROG. REC MODE AM/PM Playback by Selecting a Title Video CD/Audio CD/CD-R/ CD-RW Playback When playing back a disc recorded in the Video mode after it has been finalized, play back the disc by selecting a title after displaying the list of titles by pressing MENU.
Playback Fast Forward/Fast Reverse POWER TIMER ON/OFF DISC TIMER DVD VIDEO AUDIO CD CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR DVD RW DVD RW VR MODE VIDEO MODE DVD R VIDEO CD MENU SET/ ENTER RETURN Press FWD REV during or playback. • The disc begins fast scan at ×2 speed (1).
Playback POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR Still/Pause Frame Advance DVD VIDEO INPUT ZOOM MENU TITLE 1 TIMER PROG. REC MODE 2 ERASE PROGRAM FWD PLAY REC STILL/PAUSE STOP SKIP SEARCH F.ADV SLOW SKIP ON ORIGINAL/ DISPLAY SCREEN PLAY LIST POWER INPUT EDIT VIDEO MODE VIDEO CD STILL/PAUSE during Press F.ADV or F.ADV. • The disc goes forward by one frame each time F.ADV is pressed. • The disc goes rewind by one frame each time F.
MP3 Discs Playback CD-R POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION DNR CD-RW OPEN/ CLOSE INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ TIMER PROG. NOTE • When the DV input is selected, discs cannot be played back if “DV LINK” is set to “ON”. You can enjoy other channels by switching to the other channel. • See page 8 for details about the MP3 file format. 1 Press POWER.
Changing Image/Audio During Playback Zoom Function POWER TIMER ON/OFF DISC TIMER ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE CH ZOOM INPUT DNR MENU TITLE SET/ ENTER RETURN Angle Function You can zoom the desired part of an image during DVD playback. DVD VIDEO 1 DVD RW DVD RW VR MODE VIDEO MODE DVD R DVD VIDEO You can change the angle of view when playing a DVD video disc that contains scenes recorded from multiple angles. Press ZOOM during playback.
Changing Image/Audio During Playback Audio Setting POWER TIMER ON/OFF DISC TIMER ANGLE AUDIO SETUP/ FUNCTION DNR OPEN/ CLOSE VIDEO CD AUDIO CD VR MODE CH INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ TIMER PROG. REC MODE AM/PM DVD RW ERASE PROGRAM 100 REV You can change the audio output channel between stereo, left channel and right channel when you play Video CDs and Audio CDs.
Programmed Playback POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR Title/Track Programmed Playback DVD VIDEO MENU TITLE 1 DVD R VIDEO CD AUDIO CD Press PROGRAM while the disc is stopped. SET/ ENTER RETURN DVD RW VIDEO MODE INPUT ZOOM • The “TITLE PROGRAM” screen appears. VCR PLUS+ TIMER PROG. 100 FWD PLAY REC T 1‰/2‰ C 1/ 1 PROGRAM DVD ‰‰:‰‰:2‰ STILL/PAUSE STOP 4 F.
Programmed Playback POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR Chapter Programmed Playback DVD VIDEO MENU TITLE 1 DVD R Press PROGRAM twice while the disc is stopped. SET/ ENTER RETURN DVD RW VIDEO MODE INPUT ZOOM • The “CHAPTER PROGRAM” screen appears. VCR PLUS+ TIMER PROG.
Repeat Playback Repeat Playback POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR 1 • Each time ( REPEAT) is pressed, the repeat function changes as follows. • Depending on the disc type, the repeat function will vary. MENU TITLE SET/ ENTER RETURN (REPEAT) while a disc is playing. INPUT ZOOM Press A-B Repeat Playback VCR PLUS+ TIMER PROG.
Function Control While the disc is playing, press SETUP/FUNCTION to display the screen shown below. Using Function control, you can check at a glance and change the current settings of the each items.
Function Control POWER TIMER ON/OFF DISC TIMER OPEN/ CLOSE CH ANGLE AUDIO SETUP/ FUNCTION DNR DVD VIDEO INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ AUDIO CD 1 VIDEO MODE DVD R REV • The Function control screen appears. STILL/PAUSE STOP G F.ADV SKIP INPUT S SLOW VOL Direct Time Skip DVD VIDEO T T 1/5 C 1‰/3‰ FWD ON ORIGINAL/ DISPLAY SCREEN PLAY LIST NOTE • On some discs, this function is disabled. • This function does not work during programmed playback.
Function Control POWER ANGLE TIMER ON/OFF DISC TIMER AUDIO OPEN/ CLOSE CH DVD VIDEO SETUP/ FUNCTION DNR INPUT ZOOM MENU TITLE Use the following procedure to perform the Subtitle language, Angle or Audio setting. SET/ ENTER RETURN VCR PLUS+ 1 • The Function control screen appears. REC MODE AM/PM Press SETUP/FUNCTION during playback. TIMER PROG. ERASE PROGRAM T T 1/5 C 1‰/3‰ 100 REV FWD PLAY REC STILL/PAUSE STOP G S F.
Function Control Clearer Picture and Dynamic Sound Setting DVD VIDEO DVD RW DVD RW VR MODE VIDEO MODE DVD R VIDEO CD DOLBY VIRTUAL SURROUND • This function allows you to enjoy a “surround sound” effect when you are using an analog connection to 2channel audio equipment (TV, etc.). • The Dolby Virtual Surround feature is activated in the following cases even if digital equipment is connected. • When playing back the linear PCM audio of a DVD video disc.
Function Control POWER TIMER ON/OFF DISC TIMER OPEN/ CLOSE CH ANGLE AUDIO SETUP/ FUNCTION DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ DOLBY VIRTUAL SURROUND/DIGITAL GAMMA/DIGITAL SUPER PICTURE setting DVD VIDEO DVD RW DVD RW VR MODE VIDEO MODE DVD R 6 Press SETUP/FUNCTION or RETURN to return to the normal playback screen. VIDEO CD TIMER PROG.
Direct Selection of Scenes POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR Selecting Scenes by Title Number DVD VIDEO MENU TITLE SET/ ENTER RETURN DVD VIDEO Example: Selecting “LANGUAGE” DVD R VIDEO MODE INPUT ZOOM DVD RW Disc Menu Screen NOTE • This function only work on the finalized DVD-R or DVD-RW (Video mode). 1 Press MENU to display disc menu screen. MENU VCR PLUS+ TIMER PROG. 1 screen.
Recording for DVD Discs Before Recording POWER TIMER ON/OFF DISC TIMER Recordable Discs CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ TIMER PROG. REC MODE AM/PM ERASE PROGRAM 100 REV DVD-R Discs REC STILL/PAUSE STOP F.ADV SKIP SLOW ON ORIGINAL/ DISPLAY SCREEN PLAY LIST POWER • DVD-RW discs make it possible to repeatedly make about 1,000 recordings of high-quality sound and pictures attainable.
Recording for DVD Discs Initializing in the Video Mode POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ When a disc that has been initialized in the VR mode is used in the Video mode, select initializing in the Video mode in Disc Setup of the Initial Setup menu. • The setting can be changed so that unused discs are automatically initialized in the Video mode when loaded onto the recorder (page 86). TIMER PROG.
TV Program Recording POWER TIMER ON/OFF CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DISC TIMER DNR When recording TV programs, an once recording (from the start of recording until recording stops) is recorded as a single “title”. • Each time REC MODE is pressed, the mode changes as follows: VR mode: FINE INPUT ZOOM MENU TITLE SET/ ENTER RETURN Basic Recording DVD RW DVD RW VR MODE VIDEO MODE SP LP EP Video mode: DVD R FINE SP LP VCR PLUS+ TIMER PROG.
TV Program Recording POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ TIMER PROG. REC MODE AM/PM ERASE PROGRAM 100 REV FWD PLAY REC STILL/PAUSE STOP SKIP SEARCH F.ADV SKIP SLOW ON ORIGINAL/ DISPLAY SCREEN PLAY LIST POWER INPUT VOL CH TV CONTROL EDIT NOTE • Recorded images may not appear correctly on the screen when viewing broadcasts with poor reception.
TV Program Recording Stop Recording POWER TIMER ON/OFF DISC TIMER DNR INPUT ZOOM VR MODE VIDEO MODE DVD R Press ■STOP during recording. • Stop recording before you remove the disc from the recorder, SET/ ENTER RETURN VCR PLUS+ TIMER PROG. REC MODE AM/PM ERASE PROGRAM 100 REV FWD PLAY REC STILL/PAUSE STOP F.
Simple Recording Timer POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION DNR DVD RW DVD RW VR MODE VIDEO MODE DVD R OPEN/ CLOSE INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ TIMER PROG. The Simple Recording Timer (SRT) enables you to set the recording stop time. The SRT can be set on the TV screen by using the remote control. Important! The SRT cannot be set if the clock has not been set. Make sure the clock is set before setting the SRT.
Timer Recording with VCR Plus+® System POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ TIMER PROG. REC MODE ERASE PROGRAM AM/PM 100 REV FWD PLAY REC DVD RW VR MODE VIDEO MODE 3 DVD R Press number buttons to enter “PLUSCODE NO.” and then press The VCR Plus+ Programming System allows you to program your recorder for timer recording simply by inputting the PlusCode Programming number.
Timer Recording with VCR Plus+® System 7 TIMER POWER ON/OFF DISC TIMER DNR Press RETURN to return to the normal screen. • The display appears shown below. CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE INPUT ZOOM MENU TITLE TIMER ON/OFF BUTTON FOR TIMER RECORDING. SET/ ENTER RETURN VCR PLUS+ TIMER PROG. REC MODE ERASE PROGRAM AM/PM 100 REV 8 the timer standby mode. FWD • TIMER indicator on the front of the recorder will light up.
Timer Recording TIMER POWER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ TIMER PROG. REC MODE AM/PM DVD RW DVD RW VR MODE VIDEO MODE ERASE PROGRAM 100 REV FWD REC STILL/PAUSE STOP F.ADV SKIP SLOW ON ORIGINAL/ DISPLAY SCREEN PLAY LIST POWER INPUT 4 VOL Press ' / " to select the desired month/day (DATE) and then press Important! • Check that the clock is displaying the correct time.
Timer Recording 9 TIMER POWER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ 10 11 REC MODE 100 FWD PLAY REC STILL/PAUSE STOP SKIP SEARCH F.ADV SKIP SLOW ON ORIGINAL/ DISPLAY SCREEN PLAY LIST POWER INPUT Press TIMER ON/OFF to enter the timer standby mode. ERASE PROGRAM REV Press RETURN to finish settings. TIMER PROG. AM/PM Press SET/ENTER. • To program additional timer settings, press SET/ENTER and repeat steps 3–9.
Disc Timer Recording DVD RW POWER OPEN/ CLOSE CH ANGLE AUDIO SETUP/ FUNCTION VR MODE TIMER DISC ON/OFF TIMER DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ TIMER PROG. REC MODE AM/PM ERASE PROGRAM 100 REV FWD PLAY REC STILL/PAUSE 1 STOP F.ADV SKIP SKIP SEARCH ON ORIGINAL/ INPUT Press POWER and then load a DVD-RW disc. SLOW DISPLAY SCREEN PLAY LIST POWER • Disc timer recording is a function that lets you record programming information directly onto a disc.
Disc Timer Recording TIMER DISC POWER ON/OFF TIMER CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ TIMER PROG. REC MODE AM/PM ERASE PROGRAM 100 REV FWD PLAY REC Canceling the Disc Timer Recording Follow the procedure shown below when you want to cancel disc timer recording and use standard timer recording. (Disc timer recording is not canceled even after the recording program has ended.
Using the Recorder During Timer Standby Mode POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN This recorder cannot be used during timer standby. When you want to play back a disc that is different from the disc to be used for timer recording, first cancel timer standby. DVD RW DVD RW VR MODE VIDEO MODE 1 Press TIMER ON/OFF. • The TIMER indicator turns off and timer standby is canceled. VCR PLUS+ TIMER PROG.
Confirming/Cancelling Timer Program POWER TIMER ON/OFF DISC TIMER SETUP/ FUNCTION DNR DVD RW VR MODE VIDEO MODE DVD R You can see on the timer setting screen a list of timer programs that are already set. CH ANGLE AUDIO DVD RW OPEN/ CLOSE INPUT ZOOM MENU TITLE 1 mode, press TIMER ON/OFF to SET/ ENTER RETURN When the mode is timer standby cancel the timer standby mode VCR PLUS+ and then press POWER. TIMER PROG.
Automatic Recording of Satellite Broadcast (AV AUTO REC) POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION DNR DVD RW DVD RW VR MODE VIDEO MODE DVD R OPEN/ CLOSE INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ TIMER PROG. When connected to a Satellite receiver, etc. with timer recording functions, this recorder can be used to automatically record the timer program. (Refer to the operation manual of the Satellite receiver, etc.
Automatic Recording of Satellite Broadcust (AV AUTO REC) POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR To Cancel the AV AUTO REC Function Before Recording INPUT ZOOM Press POWER. MENU TITLE • The recorder is turned on and the AV AUTO REC indicator will be turned off. SET/ ENTER RETURN VCR PLUS+ TIMER PROG.
Problems of Timer Recording Blinking the TIMER Indicator Timer recording cannot be performed in the situations shown below. Check the contents of the error and reprogram timer recording correctly. When an error occurs, the TIMER indicator on the recorder blinks for about 5 seconds. Front Panel Display Causes • There is no disc loaded • A non recordable disc is loaded TIMER indicator is blinking.
Editing the Disc Editing Procedure Before Editing the Disc This is the basic procedure when editing titles of originals that have been recorded in the VR mode. About Editing Recorded contents that can be edited and the editing procedure differ depending on the mode in which the contents were recorded. Load a disc.
Editing the Disc POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ Switching between Playlist and Original Playback 03 VR ORG 01:00:00 REM 1:59SP DVD-RW 02 REC MODE 4 : 5 5 AM ERASE PROGRAM 100 REV FWD ORIGINAL/ PLAY LIST PLAY REC • Example of Original screen The screen for editing originals is displayed when operation is switched to DiscNavi or editing.
Editing an Original Title POWER TIMER ON/OFF DISC TIMER DNR MENU TITLE SET/ ENTER RETURN VCR PLUS+ TIMER PROG. 1 • The Original Edit Title List screen appears. ERASE PROGRAM REV FWD 2 PLAY and then press SET/ENTER. STOP F.ADV SKIP SEARCH SKIP ON POWER INPUT EDIT(ORG) 1 SLOW ORIGINAL/ DISPLAY SCREEN PLAY LIST • The title is played back without the erased part.
Editing an Original Title POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ TIMER PROG. REC MODE AM/PM ERASE PROGRAM 100 REV FWD PLAY REC STILL/PAUSE NOTE • Start and end points may change slightly. • When erasing a part, select a part that continues for at least 5 seconds. Parts of less than 5 seconds duration cannot be erased.
Editing an Original Title 3 POWER TIMER ON/OFF DISC TIMER DNR ENTER. • The selected title is played back. INPUT ZOOM Press ' / " to select “CHP MARK” and then press SET/ CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE MENU TITLE EDIT(ORG) CHAPTER MARK 1 CHP MARK SET/ ENTER RETURN VCR PLUS+ TIMER PROG.
Editing an Original Title 4 POWER TIMER ON/OFF DISC TIMER SETUP/ FUNCTION • Press |PLAY, FWD , REV, STILL/PAUSE, SKIP or SKIP to find the point to erase a chapter marker. • Red chapter markers cannot be selected. CH ANGLE AUDIO DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN Playback the chapter (The marker is blue) that you want to erase. OPEN/ CLOSE Navimark DVD RW VR MODE In the DiscNavi, each title is shown with a still frame picture.
Editing an Original Title 4 POWER TIMER ON/OFF DISC TIMER DNR • Press |PLAY, FWD , REV, STILL/PAUSE, SKIP , SKIP, SLOW or SKIP SEARCH to find the desired part. INPUT ZOOM MENU TITLE Select the desired part displayed in the DiscNavi. CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE SET/ ENTER RETURN TIMER PROG. REC MODE 1/1 ‰‰:‰‰:‰9 1/‰2 3:42AM CH 2 SP RETURN CHANGE POINT ENTER ENTER ERASE PROGRAM 100 REV FWD 5 PLAY STILL/PAUSE REC F.
Editing an Original Title Cancelling the Protection POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ NOTE • A protect mark is attached to all titles when disc protect is set to “ON” in the “PROTECT” (page 88) of the “DISC SETUP” menu. In this case, none of the titles can be unprotected. (Cancel disc protection in the “Disc Setup Screen” to unprotect discs.) TIMER PROG.
Erasing a Title from the Original or Playlist POWER TIMER ON/OFF DISC TIMER Erasing All Titles Erasing One Title DVD RW DVD RW DVD RW DVD RW VR MODE VIDEO MODE VR MODE VIDEO MODE DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ TIMER PROG. REC MODE ERASE PROGRAM AM/PM 100 REV FWD PLAY REC STILL/PAUSE This allows all Original or Playlist titles to be erased. (If a Playlist (page 72) has been created, all of the Playlist titles are erased if the Original title is erased.
Making a New Playlist (PL) POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ You can create a new Playlist by specifying the range of the material to be made into a Playlist from an Original. When specifying the range of a Playlist, the titles used for the Playlist have to be consecutive titles. DVDRW discs recorded in the VR mode can be used to create Playlists.
Making a New Playlist (PL) POWER TIMER ON/OFF DISC TIMER OPEN/ CLOSE 5 • Press |PLAY, FWD , REV, STILL/PAUSE, SKIP , SKIP, SLOW or SKIP SEARCH to find the start point. VR MODE SETUP/ FUNCTION DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN You can select part of an Original title as a new title to add to the Playlist. 1 VCR PLUS+ ERASE PROGRAM 100 REV 2 Press ORIGINAL/PLAY LIST to END POINT • The Playlist Edit Title List screen appears. PLAY STILL/PAUSE STOP SKIP SEARCH F.
Making a New Playlist (PL) 8 POWER TIMER ON/OFF DISC TIMER DNR INPUT ZOOM Press SET/ENTER. • The part is played back from the start point to the end point. • If you select “NO” in the step 7, go to step 9. CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE MENU TITLE SET/ ENTER RETURN EDIT(PL) 1 VCR PLUS+ MAKE TITLE MAKE YES NO TIMER PROG. REC MODE AM/PM SELECT ERASE PROGRAM ENTER ENTER RETURN 100 REV FWD PLAY 9 press SET/ENTER.
Editing a Playlist Title POWER TIMER ON/OFF DISC TIMER Erasing a Part from the Playlist CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR DVD RW VR MODE INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ You can erase a part from the Playlist. If you erase a part, nothing is actually erased from the Original title. 1 TIMER PROG. REV FWD 2 F.
Editing a Playlist Title 6 POWER TIMER ON/OFF DISC TIMER SETUP/ FUNCTION • When having selected a destination that is before a selected file, the file moves to the destination immediately before the selected title. CH ANGLE AUDIO DNR INPUT ZOOM 3 Press SET/ENTER. OPEN/ CLOSE and then press SET/ENTER.
Editing a Playlist Title 6 POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ TIMER PROG. REC MODE AM/PM ERASE PROGRAM 100 REV FWD PLAY REC STILL/PAUSE STOP F.ADV SKIP SEARCH SKIP ON SLOW ORIGINAL/ DISPLAY SCREEN PLAY LIST POWER INPUT 10 Press EDIT to exit the edit mode. point of the part. NOTE • When erasing a part, select a part that continues for at least 5 seconds.
Editing a Playlist Title POWER TIMER ON/OFF DISC TIMER Erasing Chapter Marker in a Playlist Navimark 1 1 DVD RW VR MODE CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR INPUT ZOOM VCR PLUS+ TIMER PROG. • The Original Edit Title List screen appears. • The Original Edit Title List screen appears SET/ ENTER RETURN 2 Press ORIGINAL/PLAY LIST to 2 100 REV FWD 3 PLAY REC F.
Tamper Proof POWER TIMER ON/OFF DISC TIMER CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR INPUT ZOOM MENU TITLE With this feature, you can lock all recorder modes to prevent accidental change. This function works even when the recorder power is off, thus preventing children from operating the recorder or viewing selected programs while you are away from home. SET/ ENTER RETURN VCR PLUS+ Tamper Proof Setting DVD VIDEO TIMER PROG.
Playback Setup Screen This section explains each item of playback setup. See “Basic Settings of the Playback Setup Screen” on page 82 to set each item. PROGRESSIVE Clearer images containing minimal flickering can be enjoyed when playing back discs by connecting a progressive-compatible TV with a component. TV MODE This lets you set whether you want to view played back material at an aspect ratio of 16:9 for wide screen TVs or at an aspect ratio of 4:3 for conventional TVs.
Playback Setup Screen PARENTAL Certain discs come preset with country codes and parental level settings defined for particular countries. PLAYBACK SETUP TV MODE 16:9 PROGRESSIVE OFF ON PARENTAL CONF LEVEL OFF CODE USA Digital OUT PCM Digital SELECT ENTER ENTER DD LEVEL (Dolby Digital Output Level) When Dolby Digital is used to record the audio on a DVD disc, the average overall volume level of the audio is relatively lower than that produced by an Audio CD.
Playback Setup Screen POWER TIMER ON/OFF DISC TIMER OPEN/ CLOSE CH ANGLE AUDIO SETUP/ FUNCTION DNR Basic Settings of the Playback Setup Screen DVD VIDEO INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ DVD RW DVD RW VR MODE VIDEO MODE DVD R NOTE • During playback, you cannot set each item in the SETUP screen. Press ■STOP to stop playback. TIMER PROG. Example: Set “PROGRESSIVE” to “ON” REC MODE AM/PM ERASE PROGRAM 100 REV 1 Press SETUP/FUNCTION to display the SETUP screen.
Playback Setup Screen 6 POWER TIMER ON/OFF DISC TIMER SET/ ENTER VCR PLUS+ TIMER PROG. SELECT ENTER ENTER RETURN REC MODE ERASE PROGRAM 100 REV FWD PLAY REC STILL/PAUSE STOP F.ADV SKIP SLOW ON ORIGINAL/ DISPLAY SCREEN PLAY LIST • Level 1: for most restricted viewing → Level 8: for adult viewing (The smaller the number, the greater the level of restriction.) • When “PARENTAL” is set to “OFF”, DVD discs can be played back regardless of the parental level. EDIT The parental level for U.S.
Playback Setup Screen DISC LANGUAGE Setting POWER TIMER ON/OFF DISC TIMER OPEN/ CLOSE DVD VIDEO CH ANGLE AUDIO SETUP/ FUNCTION DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN NOTE • During playback, you cannot set each item in the SETUP screen. Press ■STOP to stop playback. VCR PLUS+ Example: Setting “SUBTITLE” TIMER PROG. REC MODE AM/PM 1 display the SETUP screen. ERASE PROGRAM 100 REV FWD 2 REC ENTER. STILL/PAUSE • The PLAYBACK SETUP screen appears. STOP F.
Language Code List for Disc Language Code Language Name Code Language Name Code Language Name Code Language Name AA Afar FY Frisian MG Malagasy SL Slovenian AB Abkhazian GA Irish MI Maori SM Samoan AF Afrikaans GD Scots Gaelic MK Macedonian SN Shona AM Ameharic GL Galician ML Malayalam SO Somali AR Arabic GN Guarani MN Mongolian SQ Albanian AS Assamese GU Gujarati MO Moldavian SR Serbian AY Aymara HA Hausa MR Marathi SS Siswat AZ Azerbaijani
Record Setup Screen This section explains each item of record setup. See “Basic Settings of the Record Setup Screen” on page 87 to set each item. CHP INT. This is used to set the interval at which chapters are automatically inserted when recording in the Video mode. R REC START When recording using a DVD-R disc, you need to press ÆREC twice. You can change this if you prefer DVD-R recording to work in the same way as recording to DVD-RW. This function is factory preset to “2 PRESS”. RECORD SETUP CHP INT.
Record Setup Screen SAP POWER TIMER ON/OFF DISC TIMER ANGLE AUDIO SETUP/ FUNCTION DNR OPEN/ CLOSE CH INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ TIMER PROG. REC MODE AM/PM This recorder can record stereo or SAP (Separate Audio Program) broadcasts, where available. If the broadcast is in stereo, the recorder automatically records the stereo sound. If the broadcast is in SAP, you can record both the MAIN and the SAP mode to ON.
Disc Setup Screen This section explains each item of disc setup. See “Basic Settings of the Disc Setup Screen” on page 89 to set each item. VR MODE INITIALIZE When you record on a DVD-RW disc in VR mode, you need to initialize the disc in VR mode. (This is used when you want to erase the entire contents of a recorded disc. Check the recorded contents before erasing so that disc contents are not erased by mistake.) DISC SETUP VR MODE INITIALIZE APRX.
Disc Setup Screen POWER TIMER ON/OFF DISC TIMER OPEN/ CLOSE CH ANGLE AUDIO SETUP/ FUNCTION DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ Basic Settings of the Disc Setup Screen DVD RW DVD RW VR MODE VIDEO MODE 4 Press \ to select “YES” and then press SET/ENTER. • The initializing is starts. DVD R NOTE • During playback, you cannot set each item in the SETUP screen. Press ■STOP to stop playback. DISC SETUP VR MODE INITIALIZING FINALIZE PROTECT OFF ON TIMER PROG.
Option Setup Screen This section explains each item of option setup. See “Basic Settings of the Option Setup Screen” on page 92 to set each item. CLOCK DISP DUBBING When recording material played back with this recorder using other equipment, the contents displayed on the TV screen may also be recorded. This function is for preventing this from happening. This function turns on or off the clock indicator on the Front Panel Display to save electricity when the recorder is turned off.
Option Setup Screen DV AUDIO IN 3D Y/C You can select the audio to be recorded when recording material from a digital camcorder using the DV IN/OUT terminal. OPTION SETUP CLOCK DISP OFF ON POWER OFF MAN. AUTO DUBBING OFF ON DV LINK OFF ON DV AUDIO INST.1 ST.2 BLUE SCREEN OFF ON 3D Y/C OFF ON ENTER ENTER RETURN SELECT Æ ST. 1: Original audio Æ ST. 2: Overdubbed audio Æ Monaural audio cannot be input through the DV IN/OUT terminal.
Option Setup Screen POWER TIMER ON/OFF DISC TIMER OPEN/ CLOSE CH ANGLE AUDIO SETUP/ FUNCTION DNR Basic Settings of the Option Setup Screen DVD VIDEO INPUT ZOOM DVD RW DVD RW VR MODE VIDEO MODE DVD R VIDEO CD AUDIO CD MENU TITLE SET/ ENTER RETURN VCR PLUS+ TIMER PROG. NOTE • During playback, you cannot set each item in the SETUP screen. Press ■STOP to stop playback.
Connecting to Audio Equipment Playing 2 channel audio with an Analog Connector LINE R-AUDIO-L VIDEO S-VIDEO COMPONENT OUT (480I/480P) IN FROM ANTENNA IN 1 Y AUTO VHF/UHF/CATV REC DIGITAL OUT OPTICAL 1 IN 3 PB OUT PR OUT TO TV To AUDIO (Red) (White) output jacks Playing Dolby Digital (5.
Connecting to Audio Equipment Playing 2 channel audio with a Digital Connection LINE R-AUDIO-L VIDEO S-VIDEO COMPONENT OUT (480I/480P) IN FROM ANTENNA IN 1 AUTO REC Y IN 3 PB OUT PR VHF/UHF/CATV DIGITAL OUT OPTICAL 1 OUT TO TV To DIGITAL OUT OPTICAL terminal ■ Digital Connection to Audio Equipment or MD Player without a Dolby Digital Decoder • Audio CD or Video CD You can enjoy these discs by playing them back the ordinary playback procedure.
Connecting to Audio Equipment Recording by Connecting with a Digital Camcorder Using i.LINK DVD RW DVD RW VR MODE VIDEO MODE DVD R This function lets you make high picture quality and high sound quality recordings by connecting with a digital camcorder using the DV IN/OUT terminal (i.LINK). You can record material from this recorder with a digital camcorder, or record material from a digital camcorder with this recorder.
Connecting to Audio Equipment Recording with this recorder (DV Uptake) 3 • The setting changes in the order of DV (DV Input), L 1 (External Input 1), L 2 (External Input 2), L 3 (External Input 3), Channel and then back to DV (DV Input) each time this is pressed. • When “DV LINK” is set to “ON”, the digital camcorder can be controlled with the remote control of this recorder. • The following buttons can be used: |PLAY, FWD , REV, ■STOP, SLOW and STILL/PAUSE.
Connecting to Audio Equipment NOTE • Only DVC-SD signals can be input from the DV IN/OUT terminal of this recorder. • There are some digital camcorders that cannot be operated with the remote control of this recorder even if “DV LINK” is set to “ON”. Set “DV LINK” to “OFF” when this happens (page 90). • When connecting a digital camcorder to this recorder, set the power switch of the digital camcorder to “Playback (Video)” and press ■STOP.
Connecting to Audio Equipment 2 Recording Using an Analog Connection with a Digital Camcorder DVD RW DVD RW VR MODE VIDEO MODE Select the external input audio. • Refer to the section on “EX. AUDIO” (page 86) or the section on “D-MONO REC” (page 86). 3 DVD R Press INPUT to set to the channel of the external input.
Connecting to Audio Equipment Recording Material from External Equipment DVD RW DVD RW VR MODE VIDEO MODE DVD R You can record material from equipment connected to one of the external input jacks of this recorder (IN 1, IN 2 or IN 3). 1 Setup 1 Connect the equipment to an external input jack of this recorder.
Troubleshooting The following problems do not always denote a broken this recorder. Perform the checks listed below before calling service.
Troubleshooting Problem Suggested Solution Can not control your TV using this remote control • Check that you entered the correct code for your TV Unable to Record, Timer Record or • Place a disc for recording (DVD-R or DVD-RW) in the recorder and after Automatically Record from an External Input confirming that disc identification (loading) has been completed, perform the respective procedures for recording, timer recording or automatically recording from an external input.
Glossary Angle Recorded onto some DVD discs are scenes which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left side, from the right side, etc.). With such discs, you can select the angle on Function Control Screen to view the scene from different angles. Chapter Number These numbers are recorded on DVD discs.
Glossary Pan Scan 4:3 PS Screen size that cuts off the sides of the image to allow playing of Wide (16:9) software on a connected 4:3 TV. Playlist (PL) Titles for editing created based on an original are called “Playlist”. Playback Control (PBC) This is recorded on a video CD (version 2.0). The scenes or information to be viewed (or listened to) can be selected into actively with the TV monitor by looking at the menu shown on the TV monitor.
Specifications General Power supply: ................................. AC 120 V, 60 Hz Power consumption (Normal): ..................................... 40 W Power consumption (Standby): ................................... 0.9 W (During the Front Panel Display is off.) Dimensions: .................................... Approx. 430 mm × 82 mm × 361 mm (W × H × D) Approx. 1615/16" × 31/4" × 141 /4" Weight: ............................................ Approx. 5.1 kg (11.3 lbs) Operating temperature .............
ESPAÑOL (Guía de operación rápida) MEDIDAS DE SEGURIDAD IMPORTANTES .... 107 Guía de operación rápida en español ............. 108 Conexión básica ................................................................. EZ Set Up ........................................................................... Reproducción de DVD ........................................................ Reproduce solamente los discos para reproducción .... Avance rápido/Retroceso rápido ........................................
Para futura referencia, anote los números de modelo y de serie (indicados en la parte posterior este producto) en el espacio provisto. No. de modelo: DV-RW2U No. de serie: AVISO: PARA REDUCIR EL RIESGO DE INCENDIO O ELECTROCHOQUE NO EXPONGA ESTE APARATO A LA HUMEDAD. PRECAUCION PELIGRO DE DESCARGA ELECTRICA NO ABRIR PRECAUCION: TPARA REDUCIR EL RIESGO DE DESCARGA ELECTRICA, NO QUITE LA CUBIERTA. EL USUARIO NO DEBERA DAR NINGUN TIPO DE SERVICIO A NINGUNA PARTE INTERNA.
MEDIDAS DE SEGURIDAD IMPORTANTES PRECAUCIÓN: Lea todas estas instrucciones antes de utilizar este producto y guárdelas para consultarlas posteriormente. 14. Puesta a tierra de la antena exterior – Si una antena exterior o sistema de cables esta conectado al producto, asegúrese de que la antena o sistema de cables esté puesto a tierra de forma que proporcione cierta protección contra sobretensiones y acumulaciones de cargas estáticas.
Guía de operación rápida en español 4 Conexión básica La conexión siguiente es la conexión básica para ver o grabar programas de TV. TV Conecte los enchufes de salida VIDEO/AUDIO en esta grabadora, a los enchufes de entrada VIDEO/AUDIO en su TV usando el cable de video/audio. Asegúrese de que los colores de los enchufes y clavijas coincidan cuando conecta el cable.
Guía de operación rápida en español POWER TIMER ON/OFF CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DISC TIMER DNR INPUT ZOOM Reproducción de DVD Reproduce solamente los discos para reproducción DVD VIDEO MENU TITLE SET/ ENTER RETURN 1 VCR PLUS+ TIMER PROG. REC MODE AM/PM ERASE PROGRAM 100 REV FWD 3 PLAY REC STILL/PAUSE STOP 4 F.
Guía de operación rápida en español Omisión (Avance/Retroceso) POWER TIMER ON/OFF DISC TIMER DVD VIDEO AUDIO CD CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DNR INPUT ZOOM MENU TITLE SET/ ENTER RETURN VCR PLUS+ DVD RW DVD RW VR MODE VIDEO MODE DVD R VIDEO CD Avance de cuadro Imagen fija/pausa DVD VIDEO Mientras está reproduciendo un disco, esta función salta al inicio del capítulo/pista siguiente (Avance), o al capítulo/pista actual (Retroceso), y automáticamente inicia la reproducción d
Guía de operación rápida en español POWER TIMER ON/OFF CH ANGLE AUDIO SETUP/ FUNCTION OPEN/ CLOSE DISC TIMER DNR INPUT ZOOM DVD RW DVD RW VR MODE VIDEO MODE 1 MENU TITLE SET/ ENTER RETURN VCR PLUS+ REC MODE REV FWD 3 Pulse OPEN/CLOSE para abrir la bandeja de discos. 4 PLAY REC F.ADV SKIP SKIP SEARCH ON SLOW ORIGINAL/ DISPLAY SCREEN PLAY LIST POWER INPUT Coloque el disco en la bandeja de discos.
CONSUMER LIMITED WARRANTY (Valid for warranty service in the U.S.