-BIT DIGITAL HOME THEATER ENSEMBLE HOME THEATER 1 BIT DVD PLAYER LECTEUR DVD SD-AT50 DX-AT50 ENGLISH Please refer to pages i to iv and E-1 to E-52. OPERATION MANUAL MODE D’EMPLOI FRANÇAIS Se reporter aux pages iv et F-1 à F-52. SDAT50U_FRONT 1 02.7.
SPECIAL NOTES (for Users in the U.S.A.) NOTE CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IMPORTANT SAFETY INSTRUCTIONS (for Users in the U.S.A.) 1 Read Instructions - All the safety and operating instructions should be read before the product is operated. 2 Retain Instructions - The safety and operating instructions should be retained for future reference. 3 Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4 Follow Instructions - All operating and use instructions should be followed.
IMPORTANT SAFETY INSTRUCTIONS (for Users in the U.S.A.) (continued) 15 Outdoor Antenna Grounding - If an outside antenna or cable system 19 Object and Liquid Entry - Never push objects of any kind into this is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
SPECIAL NOTES REMARQUES SPÉCIALES Touch the metal outer case before you touch control buttons located on the front panel. Toucher à l’enveloppe métallique externe avant d’agir sur les touches de commande situées sur la façade. ENERGY STAR® WHY PURCHASE ENERGY STAR® LABELED PRODUCTS? Many Electrical/Electronic Products use energy both when they are on and when they are off. Americans spend more than $3 billion a year on energy consumed by home electronic products when they are not in use.
ENGLISH SD-AT50 DX-AT50 ENGLISH Introduction Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. ! SD-AT50 1-Bit Digital Home Theater and DX-AT50 DVD Player should be combined for use. ! SD-AT50 consists of AV control unit, Subwoofer/Amplifier unit, front speakers, a center speaker and surround speakers. ! DX-AT50 should be used exclusively with SD-AT50.
SD-AT50 DX-AT50 ENGLISH " Advanced Features Page Enjoy the surround sound (sound mode) . . . . . . . . . . . . . . . . . . . . . . . . . . 37 - 39 Changing the registration in the remote control . . . . . . . . . . . . . . . . . . . . . . . .40 Speaker settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41, 42 Timer and sleep operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SD-AT50 DX-AT50 Accessories ENGLISH Please confirm that the following accessories are included.
Precautions SD-AT50 DX-AT50 ENGLISH " General Caution: ! Please ensure that the subwoofer/amplifier unit is positioned in a well-ventilated area and that there is at least 4" (10 cm) of free space along the sides and back. There must also be a minimum of 6" (15 cm) of free space on the top of the subwoofer/amplifier unit. ! This subwooer/amplifier unit is fitted with a cooling fan at the rear for improved cooling. Do not cover the opening in this section with any obstacles.
SD-AT50 DX-AT50 " Discs that cannot be played " Icons used on DVD discs ! DVDs without the region number "1" or "ALL". ! DVDs with PAL system ! DVDs with SECAM system ! DVDs with MPEG sound ! DVD-ROM ! DVD-RAM ! DVD-Audio Check the icons of the DVD case before playing your discs. ! ! ! ! ! ! CDG Video CD Photo CD CD-ROM SACD Discs recorded in special formats, etc.
Controls and indicators SD-AT50 DX-AT50 3 4 5 (1) (2) (3) (4) (5) (6) (8) (7) (9) (10) 6 Front 11 7 8 12 (11) (12) (13) 9 14 Back 15 16 17 18 19 20 21 Left Front Speaker Indicator Front Left Signal Indicator Center Speaker Indicator Center Signal Indicator (5) Front Right Signal Indicator (6) Right Front Speaker Indicator (7) Low Frequency Effect Indicator (8) Subwoofer Indicator (9) Left Surround Speaker Indicator (10) Surround Left Signal Indicator (11) Surround Monaural Signal In
SD-AT50 DX-AT50 Controls and indicators (continued) ENGLISH " Subwoofer/Amplifier Unit Reference page Side 1. Subwoofer 2. Bass Reflex Duct 3. System Connection Jack (to AV control unit) . . . . . . . . . . . . . . . . .11 4. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 5. System Connection Jack (to AV control unit) . . . . . . . . . . . . . . . . .11 6. AC Power Input Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SD-AT50 DX-AT50 ENGLISH " DVD Player Display 3 4 5 8 6 9 7 10 Front Reference page 10.On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 11.DVD Chapter Skip or CD/MP3 Disc Track Down Button . . . . . 29, 33 12.DVD Chapter Skip or CD/MP3 Disc Track Up Button . . . . . . . . 29, 33 13.Disc Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 14.Disc Play Button . . . . . . . . . . . . . . . . . . . . . . . . .
SD-AT50 DX-AT50 Controls and indicators (continued) ENGLISH " Remote control [Front] 1 15 16 2 4 17 18 19 5 20 6 21 7 8 22 23 9 24 10 12 25 26 27 13 28 14 29 30 - Controls and indicators - General Information 3 11 Reference page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 2. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 3. CD/MP3 Disc Play Mode Select Button . . . . . . . . . .
SD-AT50 DX-AT50 ENGLISH " Remote control 12 2 13 3 14 4 15 5 16 6 17 18 7 8 9 Reference page 1. DVD Angle Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 2. DVD Subtitle Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 3. Disc A - B Repeat Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 4. DVD Frame Advance, Disc Pause Button . . . . . . . . . . . . . . . . . . . 28, 30 5. Direct Button .
SD-AT50 DX-AT50 System connections ENGLISH " Connecting the units AM loop antenna DVD Player Connecting units Subwoofer/ AV control unit Amplifier unit Subwoofer/ AV control unit Amplifier unit Digital audio cable AV control unit DVD player AV control unit DVD player AV control unit DVD player FM antenna - System connections - Preparation for Use System connection cable (For DVD player) Connect the DVD player, AV control unit and subwoofer/amplifier unit as follows.
SD-AT50 DX-AT50 ENGLISH " Connecting the satellite speakers Front speaker (Right) Center speaker Insert the speaker plugs to the subwoofer/amplifier unit according to the color coding. Connect the speaker cords to the satellite speakers first and then to the subwoofer/ amplifier unit. Front speaker (Left) (Satellite speaker) Speaker terminals Red Black Black Red Red Label Tube Speaker Plug Black Green White Plug in with the rising side facing to the left.
SD-AT50 DX-AT50 Antenna connection TV connection Supplied FM antenna: Caution: ENGLISH Before connecting the TV, turn off all the equipment. Connect the FM antenna wire to the FM 75 OHMS jack and position the FM antenna wire in the direction where the strongest signal can be received. " Connecting to TV with video cable Supplied AM loop antenna: Preparation for Use - Antenna connection / TV connection - Connect the AM loop antenna wire to the AM and GND terminals.
SD-AT50 DX-AT50 ENGLISH This DVD player has two jacks to output images in addition to the VIDEO OUT jack. To enjoy clearer DVD images, connect your TV to these jacks. " Connecting to TV with S-video cable " Connecting to TV with Component video cable If the connecting TV provides progressive scanning, set the video mode selector switch to PROGRESSIVE to enjoy high-density images. If not, switch back to INTERLACE.
SD-AT50 DX-AT50 System installation TV connection (continued) ENGLISH " Installing AV control unit and DVD player To listen to the TV sound via the speakers of this system: Using the audio cable, you can listen to the TV sound with this system. (The audio cable is not supplied. Purchase a commercially available cable.) You can place one unit on top of the other or place them separately in a horizontal position. With the supplied stands, the unit can be installed vertically.
SD-AT50 DX-AT50 ENGLISH " Placing the speaker system The speaker stands and speaker wall brackets are optionally available. (See page 51.) Refer to their manuals for assembly. The best surround effect will be achieved by placing each speaker at the same distance from the listening position. It is recommended to arrange the speakers as shown below. Identify each speaker by the tube color.
SD-AT50 DX-AT50 ENGLISH Remote control " Battery installation " Test of the remote control 1 Remove the battery cover. 2 Insert the batteries according to the direction indicated in the battery compartment. Check the remote control after checking all connections have been made correctly. (See pages 11 - 18.) Point the remote control directly at the remote sensor on the AV control unit. Likewise, point the remote control at the AV control unit to operate the DVD player unit.
General control SD-AT50 DX-AT50 ENGLISH " Connecting the AC power cord " To turn the power on Subwoofer/amplifier unit Press the ON/STAND-BY button. After checking all the connections, connect the AC power cord to the AC power input jack, then the subwoofer/amplifier unit into the AC outlet. The power indicator lights up. If the power does not turn on, check if the power cord is plugged in properly.
SD-AT50 DX-AT50 Changing the initial setting of DVD ENGLISH Turn on the TV, and switch the input to the "VIDEO 1" or "VIDEO 2" etc. accordingly. A new setting will be retained even if the DVD player is set to the stand-by mode. If you want to restore or change the setting, reset it. 1 Press the ON/STAND-BY button to turn the power on. ! The startup screen appears. ! If the startup screen does not appear, set the input to "DVD". ! The disc should be stopped at this time.
SD-AT50 DX-AT50 ENGLISH Setting LANGUAGE Selectable parameters (* indicates initial settings.) AUDIO ORIGINAL * ENGLISH Description Selects the language audible from the speakers. SELECT: SET: ENTER SETUP CANCEL: RETURN EXIT: DISPLAY SUBTITLE OFF * ENGLISH Selects the subtitle displayed on the TV screen. DISC MENU ORIGINAL ENGLISH * Selects the disc menu language. PLAYER MENU ENGLISH * FRANÇAIS Selects the initial or playback setting language.
SD-AT50 DX-AT50 Changing the initial setting of DVD (continued) ENGLISH " Disc language Indicator AUDIO Setting A language for audio can be set. You can specify a language for conversation and narration. English ou nk y Preparation for Use - Changing the initial setting of DVD - Thank you French LARDING CHARGEMENT ci Mer A language for subtitle can be set. The subtitle is displayed in a specified language.
SD-AT50 DX-AT50 ENGLISH Setting 4:3 LETTER When playing a wide image (16:9) disc, black bands are inserted at the top and BOX bottom and you can enjoy full wide images (16:9) on a 4:3 size TV. Indicator Level 1 Levels 2 to 7 Level 8 A 4:3 disc is played in 4:3. 4:3 PAN & When playing a wide image (16:9) disc, the left and right sides of the image are SCAN cut (pan scan) to display a natural-looking 4:3 size image. A wide image disc without pan scan is played back in 4:3 letterbox.
SD-AT50 DX-AT50 Language code list for disc language Preparation for Use - Language code list for disc language - ENGLISH Code 4747 4748 4752 4759 4764 4765 4771 4772 4847 4851 4853 4854 4855 4860 AA AB AF AM AR AS AY AZ BA BE BG BH BI BN 4861 4864 4947 4961 4965 4971 5047 5051 5072 5158 5160 5161 5165 5166 5167 5247 5255 5256 5261 5264 BO BR CA CO CS CY DA DE DZ EL EN EO ES ET EU FA FI FJ FO FR Language name Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian
Setting the clock SD-AT50 DX-AT50 ENGLISH By setting the AV control unit on time, you can use it not only as a clock but also for timer playback. 3 [Front] Press the or button to adjust the "AM 12:00" is 12 o'clock midnight. hour and then press the ENTER but- "PM 12:00" is 12 o'clock noon. ton. ! Press the or button once to advance the time by 1 hour. Hold it down to advance continuously. Press the or button to adjust the minutes and then press the ENTER button.
SD-AT50 DX-AT50 Listening to the radio ENGLISH [Front] 1 2 Press the ON/STAND-BY button to turn the power on. 3 Press the Press the FUNCTION button to display FM or AM, and then the BAND button repeatedly to select the desired frequency band (FM STEREO, FM or AM). or button to tune in to the desired station. Manual tuning: Press the station.
Listening to the memorized station " Memorizing a station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) " To recall a memorized station Press the TUNER PRESET ( tion. or ) button to select the desired sta- Perform steps 1 - 3 in "Listening to the radio" on page 25. Press the ENTER button to enter the preset tuning saving mode. Preset channel It's easier with the direct buttons on the remote control.
SD-AT50 DX-AT50 Playing a disc ENGLISH Turn on the TV, and switch the input to the "VIDEO 1" or "VIDEO 2" etc. accordingly. 1 Press the ON/STAND-BY button to turn the power on. The startup screen appears. 2 Press the FUNCTION button to set the input to "DVD". 3 - Playing a disc - Basic Operation ! Select "DVD" when playing a audio CD. ! The same operation can be performed by pressing the DVD/CD the remote control. Press the button on button to open the disc tray.
Playing a disc (continued) SD-AT50 DX-AT50 ENGLISH Notes: ! A safety feature automatically sets the system to the power stand-by mode if you set the volume level too high while playing certain types of discs. If this happens, lower the volume level and restart playback. ! Stop positions may be recorded on some discs. When you play such a disc, playback stops there. ! During an operation, " " may appear indicating that the operation is disabled by the disc.
SD-AT50 DX-AT50 Basic operation ENGLISH [Front] " Fast forward/Fast reverse (search) [Back] You can search the desired point as you play the disc. 1 While a disc is playing, press the Example: When the or button. button is pressed 2 (about 2 times) 8 (about 8 times) 60 (about 60 times) 30 (about 30 times) ! The disc is forwarded by the - Basic operation - Advanced Disc Features ! The scanning speed will change as follows at each press of the button.
SD-AT50 DX-AT50 You can select and play the desired chapter (track) or title. 1 While in the stop or playback mode, press the DIRECT button. Example: During DVD playback 2 Example: During CD playback Selecting a chapter (track) " Still picture/Frame advance Enter the chapter (track) number using the direct buttons (0 - 9) within 30 seconds. You can freeze the image and advance frame by frame.
SD-AT50 DX-AT50 ENGLISH Useful features " To play in random order (random play) " To play in the desired order (programmed playback) The system selects the order of playback. You can play back the desired tracks in the sequence you want. Maximum of 99 tracks can be programmed. 1 While stopped, press the MODE button twice. RANDOM 1 While stopped, press the MODE button. 2 Press the DVD/CD button. 2 Press the DVD/CD PROGRAM TIME 0:00:00 1/1 Enter a track number with direct buttons.
SD-AT50 DX-AT50 ENGLISH " To play repeatedly (repeat play) You can play a chapter (track) or a title repeatedly by specifying it during playback. You can play the desired portion repeatedly by specifying it during playback. While the disc is playing, press the REPEAT button. Each time the button is pressed, repeat play mode changes in the following order. Audio CD OFF TITLE CHAPTER While the disc is playing, press the A - B REPEAT button. [A - ] This registers the start point (A).
SD-AT50 DX-AT50 MP3 disc operation ENGLISH [Front] Direct play 1 2 Press the DIRECT button. Press the , , or button to select a track and press the DVD/CD button. Programmed play 1 2 3 4 While in the stop mode, press the MODE button. Press the or button to select an album and press the ENTER button. Press the or button to select a track and press the ENTER button. Press the button to return to the album selection screen. After programming is completed, press the DVD/CD button.
Various settings SD-AT50 DX-AT50 The subtitle language and the audio language you select are reset each time you turn off the system or change the disc. To always play back the DVD in the preferred languages, set them in the initial setting screen (see page 19). " To change the audio language (audio output) [Back] During playback, you can change the audio language (audio output). Within 5 seconds, press the AUDIO the desired audio number. DVD 1. ENG (DTS 5.
SD-AT50 DX-AT50 Various settings (continued) ENGLISH " To brighten an image (black level setting) Each press of the ZOOM button cycles through the zoom settings as follows: ZOOM [ Normal image Bright image [Front] ZOOM [x2] ZOOM indicator Within 5 seconds, press the BLACK LEVEL button repeatedly to select "ON" or "OFF". OFF ON While a disc is playing, press the ZOOM button.
SD-AT50 DX-AT50 " To change the display on TV screen You can display or hide the operation indicators on the TV screen. While the disc is playing, press the ON SCREEN button. (The display is changed at each press of this button.
SD-AT50 DX-AT50 Enjoy the surround sound (sound mode) ENGLISH The spatial sound effect is activated when you play a DVD recorded in Dolby Digital or DTS. You can also enjoy 2-channel stereo sound in Dolby Pro Logic II. DVD player Dolb y DTS Digital s ignal signa l Dolby Digital DTS Digital tuner, etc.
SD-AT50 DX-AT50 ENGLISH Acoustic effect The input signal is recognized automatically and the indicator lights up. Standard You can enjoy the normal surround with various scenes. MOVIE: The bass level is increased for powerful sound effect. MUSIC: You can enjoy lively sound by producing the articulate sound. NIGHT: Soft but powerful sound is achieved even at low volumes. Surround This mode provides expansive listening area by emitting 2-channel sound. "SURROUND" will appear.
SD-AT50 DX-AT50 Enjoy the surround sound (sound mode) (continued) ENGLISH " Changing the sound mode To enjoy in standard mode: Example: Dolby Digital 5.1ch Advanced Features - Enjoy the surround sound (sound mode) - While the disc is playing, press the STANDARD button. "STANDARD" will appear. To enjoy with dynamic sound: [Front] Press the DYNAMIC SOUND button. Each press of this button changes the mode in the order of "MOVIE" "NIGHT".
Changing the registration in the remote control Use buttons on both sides of the remote control. 1 While holding down the TV ON/STAND-BY button, press the TV CHANNEL button. 2 Enter the manufacturer setting number (2 digits) with the direct buttons (0 - 9) and press the TV ON/STAND-BY button. [Back] The setting is registered and the TV can be operated with the remote control of this system.
SD-AT50 DX-AT50 Speaker settings ENGLISH The speaker settings are not displayed on the TV screen. Caution: To set the speaker size, set the sound mode to "STANDARD". [Back] Note: The recommended size is set for the supplied speakers. See the upper table on page 42 for other speakers.
SD-AT50 DX-AT50 ENGLISH " Speaker level setting " To end the speaker setting If sounds from the speakers are uneven, you can equalize them by adjusting the speaker levels. Press the RETURN 2 Within 10 seconds, press the speaker. 3 Within 10 seconds, press the or or button to select "SP Speaker type Front speaker (Left, Right) button to select the desired Center speaker or button to adjust the level. Surround speaker (Left, Right) ! You can adjust the level at 1 dB intervals.
SD-AT50 DX-AT50 Timer and sleep operation ENGLISH The system turns on and plays the desired source (DVD, CD, MP3 disc, tuner) at the preset time. 1 - Timer and sleep operation - Advanced Features [Front] Turn the power on and press the TIMER button. Set the AV control unit on time if "TIMER STANDBY" does not appear. 2 Within 10 seconds, press the or button to select "TIMER SET", and press the ENTER button. 3 Press the or button to adjust the hour and then press the ENTER button.
SD-AT50 DX-AT50 ENGLISH Reusing the memorized timer setting: While in the timer playback stand-by mode, press the TIMER button. 2 Within 10 seconds, press the or button to select "TIMER CALL", and press the ENTER button. The system returns to the timer playback stand-by mode after the setting contents are displayed in order. When the start time is reached: Playback starts automatically and the volume increases gradually. The timer playback indicator flashes.
SD-AT50 DX-AT50 Timer and sleep operation (continued) ENGLISH " Setting the sleep timer You can set the system to the power stand-by mode at the specified time. - Timer and sleep operation - Advanced Features 1 1 2 While "SLEEP" is indicated, press the TIMER button. Within 10 seconds, press the or button to select "SLEEP". While the disc is playing, press the TIMER button. 2 Within 10 seconds, press the or button to select "SLEEP SET", and press the ENTER button.
Audio connection of other equipment You can hear the sound of other equipment via this product.Connect VCR or digital tuner to TV directly to receive the images (refer to the operation manual of each equipment). " Connection for the VCR sound SD-AT50 DX-AT50 " Connection for the digital tuner sound (or other optical digital equipment such as an MD player) ENGLISH To audio input jacks Digital tuner, etc.
SD-AT50 DX-AT50 Operating the connected TV ENGLISH The connected TV can be operated with the remote control of this system. The factory setting allows you to operate Sharp's TVs and VCRs with it. To operate those of other manufacturers, change the contents registered in the remote control. (See page 40.) [Front] " Watching TV 1 2 3 Press the TV ON/STAND-BY button to turn on the TV. Press the TV CHANNEL ( or Press the TV VOLUME ( or ) button to set the channel. ) button to control the TV volume.
Error indicators and warnings SD-AT50 DX-AT50 ENGLISH When you load an unplayable disc or fail to perform operations properly, the following messages are displayed on the AV control unit, the DVD player and the TV screen. DVD player display Meaning ! The disc is not loaded. ! The disc is scratched or dirty and cannot be recognized. ! The disc is loaded upside down. ! The speaker is not connected properly. ! The amplifier is defective.
SD-AT50 DX-AT50 Troubleshooting chart ENGLISH Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center. " General Symptom No sound is heard. Possible cause ! Is the volume level set to "0"? References - Troubleshooting chart - ! Are the headphones connected? ! Are the speaker wires disconnected? Reference page P. 18 P. 28 P.
SD-AT50 DX-AT50 ENGLISH " DVD Player Even though a disc has been ! Is the disc loaded upside down? loaded, "- - - - - " is displayed. ! Is the disc very dirty? Playback sounds are ! Does the disc satisfy the standards? skipped. ! Is the system located near excessive vibrations? ! Has condensation formed inside the system? The control buttons do not ! Is the disc very dirty? function. Music or video play- ! Does the disc satisfy the standards? back is interrupted.
SD-AT50 DX-AT50 ENGLISH Maintenance Specifications " Cleaning the cabinet As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth.
SD-AT50 DX-AT50 ENGLISH Dimensions Width: 8-1/2" (215 mm) Height: 2-5/16" (58 mm) Depth: 10-5/16" (261 mm) Weight 2.9 lbs. (1.3 kg) Audio input terminals Digital input (Optical) 1 Digital input (coaxial) 1 Analogue input (RCA type) 8 (L/R) Audio output terminal Headphones: 16 - 50 ohms (recommended: 32 ohms) Other terminals System control 3 Frequency range FM: 87.
VALID IN U.S.A. ONLY CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.