Owner's Manual

2-18
COPIER
Contents
USING THE DOCUMENT GLASS TO MAKE 2-SIDED
COPIES
Keys in the display can be selected with the arrow keys and the [OK] key.
Automatic 2-sided copying of 1-sided
originals
1
Open the automatic document feeder,
place the original face down on the
document glass, and then gently close
the automatic document feeder.
• The maximum original size that can be placed on the
document glass is 8-1/2" x 11" (A4).
• Align the middle of the original with the tip of the mark.
• Place the original in the appropriate position for its size as
shown above.
• After placing the original, be sure to close the automatic
document feeder. If left open, parts outside of the original will
be copied black, causing excessive use of toner.
2
Select the [Original] key.
Originals
Copies
A
A
Portrait original
Landscape original
Align the top edge of the
original against the side of
the document glass with
the scale.
Align the right side of the
original against the side of
the document glass with
the scale.
5-1/2" x 8-1/2"
(A5)
8-1/2" x 11" (A4)
B5
mark
Document glass scale
OKBACK