Owner's Manual

2-11

COPIER

Contents

Check the paper to be used and the

color mode.

Make sure that the desired paper (tray) and color mode are

selected.

• To change the paper (tray), select the [Paper Select] key and

press the [OK] key.

☞ PAPER TRAYS (page 2-9)

• To change the color mode, select the [Color Mode] key and

press the [OK] key.

☞ COLOR COPY MODES (page 2-21)

For some original size settings, the same size of paper as the original may not be automatically selected. In this case,

manually change the paper size.

Set the number of copies (number of

sets) with the numeric keys.

• Up to 999 copies (sets) can be set.

• A single copy can be made even if "0" appears for the number of copies.

If an incorrect number of copies is set...

Press the [CLEAR] key ( ) and then enter the correct number.

Press the [COLOR START] key or the [BLACK & WHITE START] key.

Even if a color mode is selected, copying will take place in black and white if the [BLACK & WHITE START] key is

pressed.

To cancel scanning of the original and copying...

Press the [STOP] key ( ).

OKBACK