Owner's Manual

2-19
COPIER
Contents
3
Specify the original size.
When placing an AB size or non-standard size original, specify the original size as explained in "ORIGINAL SIZES"
(page 2-28).
4
Select the [2-Sided Copy] key.
5
Select the 2-sided copy mode.
(1) Select the [1-Sided to 2-Sided] key.
(2) Select the [Basic Menu] key.
The [2-Sided to 2-Sided] key and [2-Sided to 1-Sided] key cannot be used when copying from the document glass.
6
Check the paper to be used and the
color mode.
Make sure that the desired paper (tray) and color mode are
selected.
• To change the paper (tray), select the [Paper Select] key and
press the [OK] key.
☞PAPER TRAYS (page 2-9)
• To change the color mode, select the [Color Mode] key and
press the [OK] key.
☞ COLOR COPY MODES (page 2-21)
For some original size settings, the same size of paper as the original may not be automatically selected. In this case,
manually change the paper size.
OKBACK
OKBACK
OKBACK
(1)
(2)
OKBACK