Owner's Manual

2-29
COPIER
Contents
Specifying a non-standard original size
Keys in the display can be selected with the arrow keys and the [OK] key.
1
Select the [Size Input] key.
2
Enter the original size.
(1) Enter the X (horizontal) dimension of the
original.
Select either of the keys with the keys and
press the [OK] key repeatedly to change the number.
• When the document glass is used, enter a number from
1" to 11-5/8" (25 mm to 297 mm).
• When the automatic document feeder is used, enter a
number from 3-1/2" to 14" (89 mm to 356 mm).
• When a number which is from 5-3/8" (139 mm) and less
is entered in 2-Sided copy mode, an original cannot be
scanned.
• If the horizontal dimension of the original is less than
3-1/2" (89 mm), use the document glass.
(2) Enter the Y (vertical) dimension of the
original.
Select either of the keys with the keys and
press the [OK] key repeatedly to change the number.
• When the document glass is used, enter a number from
1" to 8-1/2" (25 mm to 216 mm).
• When the automatic document feeder is used, enter a
number from 4" to 8-1/2" (100 mm to 216 mm).
• If the vertical dimension of the original is less than 4"
(100 mm), use the document glass.
(3) Select the [Basic Menu] key.
You will return to the base screen.
Make sure that the entered dimensions appear in the
[Original] key.
When a number from 11-3/4" to 14" (298 mm to 356 mm) to the X (horizontal) dimension and a number from 1" to
3-7/8" (25 mm to 99 mm) to the Y (vertical) dimension are entered at the same time, an original cannot be scanned.
To cancel the size input...
To cancel the size input, select the [Cancel] key.
OKBACK
OKBACK
(3)
(1) (2)