Owner's Manual

2-74
COPIER
Contents
3
Press the [COLOR START] key or the [BLACK & WHITE START] key to scan the
first set of originals.
Scanning begins.
To cancel scanning...
Press the [STOP] key ( ).
4
Insert the next set of originals and press the [COLOR START] key or the [BLACK
& WHITE START] key.
Repeat this step until all originals have been scanned.
For the second set and following sets, use the same [START] key as you did for the first set.
To cancel scanning...
Press the [STOP] key ( ). All scanned data will be cleared.
5
Select the [Read-End] key.
To cancel copying...
Press the [STOP] key ( ).
To cancel job build mode....
Select the [Job Build] key in the screen of step 2 so that it is not highlighted.
OKBACK