Owner's Manual

4-62

FACSIMILE

Contents

CHECKING THE IMAGE BEFORE PRINTING

When "Received Data Image Check Setting" (Web page only) is enabled* in the system settings (administrator), you

can check a received image in the display before printing it out. When this function is enabled, follow the steps below to

print a received image.

* The factory default setting is disabled.

Keys in the display can be selected with the arrow keys and the [OK] key.

When an image is received, a

confirmation prompt will appear. Select

the [Yes] key.

If this message appears while you are configuring settings of

any type and you select the [Yes] key, the settings that you are

configuring will be canceled. If this message appears in another

mode, you will return to the base screen of image send mode

after checking the image.

Select the received image

(1) Select the key of the received image that

you want to check.

Multiple received images can be checked.

(2) Select the [Image Check] key.

To delete an image that has been selected, select the

[Delete] key. To print an image that has been selected,

select the [Print] key.

OKBACK

BBB BBB

9876543210

0612345678

0123456789

CCC CCC

0123456789

04/04/2010