Owner's Manual

6-21
SYSTEM SETTINGS
Contents
OPERATION PANEL (ADMINISTRATOR)
Copy Function Settings
Item Factory default setting Page
■ Copy Function Settings
6-28
● Initial Status Settings
6-28
X Color Mode Full Color
X Paper Tray Tray 1
X Exposure Type Auto
X Copy Ratio 100%
X 2-Sided Copy 1-Side to 1-Side
X Output Auto
● Other Settings 6-29
X Copy Exposure Adjustment
6-29 Color 5
 Black & White 5
X Add or Change Extra Preset Ratios – 6-29
X Setting a Maximum Number of Copies 999 6-29
X Initial Margin Shift Setting
6-29 Side 1 1/2"
 Side 2 1/2"
X Erase Width Adjustment
6-29
 Edge Clearance Width 1/2"
X Card Shot Settings
6-29 Original Size X: 3-3/8", Y: 2-1/8"
 Fit to Page Disabled
X Disabling Deletion of Job Programs Disabled 6-29
X Disabling of Bypass-Tray in Duplex Copy Disabled 6-29
X Disabling of Auto Paper Selection Disabled 6-29
X Auto Selection of Paper Tray that was Last Loaded Disabled 6-29
X Color 600dpi x 600dpi Scanning Mode for Document Feeder Enabled 6-30
X Color Quick Scan from Document Glass Disabled 6-30
X B/W 600dpi x 600dpi Scanning Mode for Document Feeder Enabled 6-30
X B/W Quick Scan from Document Glass Disabled 6-30
● Color Adjustments 6-31
X Initial Color Balance Setting Factory default state 6-31
X Auto Color Calibration – 6-31