Specifications

Bottom
Item Component Description
(1) Vents (2) Enable airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during
routine operation.
(2) Battery release latch Releases the battery from the battery bay.
(3) Docking connector Connects an optional docking device.
(4) Service cover release latch Releases the service cover from the computer.
(5) Battery bay Holds the battery.
(6) Accessory battery connector Connects an optional accessory battery.
(7) Wireless and memory module
compartments and flash drive bay
Holds the flash drive, and also contains the WLAN
module slot, and the memory module slots.
CAUTION: To prevent an unresponsive system, replace
the wireless module only with a wireless module
authorized for use in the computer by the governmental
agency that regulates wireless devices in your country or
region. If you replace the module and then receive a
warning message, remove the module to restore
computer functionality, and then contact
technical support.
Bottom
11