Specifications

Optical drive

NOTE: The optical drive spare part kit includes a bezel and bracket.

Description Spare part number

DVD-ROM drive 647672-001

Before removing the optical drive, follow these steps:

Shut down the computer.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 33).

Remove the service cover (see

Solid-state module on page 34).

Remove the optical drive:

1. Remove the four screws that secure the optical drive to the computer.

2. Loosen the optical drive captive screw (1).

3. Using a flat-bladed screwdriver, gently push the tab (2) to release the optical drive.

38 Chapter 4 Removal and replacement procedures