Specifications

10.
Remove the two Phillips PM2.5×3.3 screws (1) that secure the display assembly to the computer.
11.
Remove the display assembly (2).
12. If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a.
Remove the two screw covers (1) and the two Phillips PM2.0×5.0 screws (2) that secure
the display bezel to the display assembly. The screw covers are available in the Rubber Kit,
spare part number 639483-001.
b.
Flex the inside edges of the bottom edge (1) and the left and right sides (2) of the display
bezel until the bezel disengages from the display enclosure.
c. Slide and hold the display release hook (3) to the right.
d. Flex the inside edge of the top edge (4) of the display bezel until the bezel disengages from
the display enclosure.
60 Chapter 4 Removal and replacement procedures