Instruction Manual

3
GRAND TOTAL MODE SELECTOR:
“GT”: This selector will accumulate the following:
(“ + “ will be printed.)
1. Addition and subtraction totals obtained with .
2. Product and quotient totals obtained with
+
or
–
.
3. Answers obtained with
%
or
MU
.
“•”: Neutral
PAPER FEED KEY
LAST DIGIT CORRECTION KEY
GRAND TOTAL KEY:
Prints and clears the “GT” memory contents.
NON-ADD / SUBTOTAL KEY:
Non-add — When this key is pressed right after an entry of a number in the Print
mode, the entry is printed on the left-hand side with “#”.
This key is used to print out numbers not subjects to calculation
such as code, date, etc
Subtotal — Used to get subtotal(s) of additions and/or subtractions. When
pressed following
+
or
–
, the subtotal is printed with “ ” and the
calculation may be continued.
CLEAR / CLEAR ENTRY KEY:
Clear — This key also serves as a clear key for the calculation register and
resets an error condition.
Clear entry — When pressed after a number and before a function, clear the
number.
TOTAL KEY:
When pressed after
+
or
–
, prints the total of addition and subtraction with “
∗
”.
EQUAL KEY:
Gives the results of multiplication and division and performs repeat calculation
with a constant.
Multiplication:
The calculator will automatically remember the first number entered (the
multiplicand) and instruction.
Division:
The calculator will automatically remember the second number entered (the divisor)
and instruction.
#
GT
C
CE
GT
•
EL-2902E(AC7)-Eng 00.11.7, 2:15 PM3