Operation Manual, User's Manual

1-97
BEFORE USING THE MACHINE►LOADING PAPER
TRAY 2 - 5 (when a 600-sheet paper feed unit
or two/three/four 600-sheet paper feed units
are installed)
A maximum of 600 sheets of paper from size A5 to A4 (5-1/2" x 8-1/2" to 8-1/2" x 14") can be loaded into trays 2 to 5.
If you loaded paper of a different type or size from the paper previously loaded, be sure to check the settings in "Settings
(administrator)". Incorrect setting affects automatic paper selection action. It may cause print failure, printing on paper of a
wrong size or type or paper misfeeds.
Do not place heavy objects on the tray or press down on the tray.
• To check the type and size of paper:
[Tray Settings] in the home screen or in "Settings", select [Status] → [Machine Identification] → [Paper Input Tray Status]
→ [Paper Tray Settings].
• To set the type and size of paper:
Set this in [Tray Settings] in the home screen or in “Settings” - [System Settings]→[Common Settings]→[Paper
Settings]→[Paper Tray Settings].
1
Pull out the paper tray.
Gently pull the tray out until it stops.
To load paper, go to step 3. To load a different size of
paper, go to the next step.