Operation Manual, User's Manual

1-98
BEFORE USING THE MACHINE►LOADING PAPER
2
Adjust guide plates A and B to match
the longitudinal and transversal
dimensions of the paper to be loaded.
The guide plates A and B are slidable. Squeeze the
separator plate lever and slide to the desired paper size.
Adjust to the non-standard paper size so that the paper will
not be too loose or too tight.
• When loading 8-1/2" x 14" paper, remove divider plate A.
Move divider plate A all the way to the paper feed opening (right side), and pull up.
• If the machine does not recognize the paper size even though 8-1/2" x 14" size is correctly loaded, check if the holder
is positioned at 8-1/2" x 14” in trays 2 to 5.
• When setting 8-1/2" x 11" size paper, remove the 2 regulation plates with green colour on the front and back side of
the tray before setting the paper. The plates are contained in the inside storage space of the back side of the tray.
3
Fan the paper.
Fan the paper well before loading it. If the paper is not
fanned, multiple sheets may feed at once and cause a
misfeed.
8 1/2
Holder
Regulation plate Storage space