Operation Manual, User's Manual
Table Of Contents
1-27
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
Fix transition time.
The Auto Power Shut-Off Timer is fixed. Select [Fix transition time.], and set the transition time in [Auto Power Shut-Off
Timer].
When this setting is enabled, the [Change transition time by time of day.] option is disabled.
Change transition time by time of day.
This function controls the transition to Auto Power Shut-Off mode optimally for each time period by analyzing the use of
the machine based on job logs obtained during a 4-week period.
When this setting is enabled, the [Fix transition time.] option is disabled.
Transition to Energy Saving and Auto Power Shut-Off modes
* Factory default setting
• The image transfer control settings are not changed.
• This does not link to the Power On/Off Scheduling. If both of them are enabled, the Power On/Off Scheduling settings
precede.
• Pages are counted for each paper size separately.
• When the power supply of the machine was off, there was no job during this time.
Pattern Transition time
Average outputs per
hour
*
Mode1 (Job Start
Priority1)
After 1 hour 700 or more
Mode2 (Job Start
Priority2)
After 30 minutes 150 to 699
Mode3 (Energy Saving
Priority1)
After 5 minutes 40 to 149
Mode4 (Energy Saving
Priority2)
After the minimum time period Up to 39
Sleep Mode Power
Level
Low Power : The machine switches to the power saving mode,
but it takes some time to recover.
Fast Wake Up : Compared with Low Power, the power value rises
by a certain degree, but it results in faster
recovery.
Motion Sensor
(MX-M3071/MX-M3071S/MX-M3571/MX-M3571S/MX-M4071/
MX-M4071S/MX-M5071/MX-M5071S/MX-M6071/MX-M6071S):
This enables switching of power saving modes by
the motion sensor.
–