Instruction manual

NORMAL MAINTENANCE
No lubrication is required for any moving parts, motor, bearings, or sharpening surfaces.
There is no need for water on the abrasives. The exterior of the sharpener may be cleaned
by carefully wiping with a damp cloth. Do not use detergents or abrasive cleansers.
Periodically or as needed you can remove metal dust that will accumulate under the
Module from repeated sharpenings.
SERVICE
In the event post-warranty service is needed, return your sharpener to your retailer or
EdgeCraft’s national distributor where the cost of repair can be estimated before the
repair is undertaken.
Please include your return address, daytime telephone number and a brief description of
the problem or damage on a separate sheet inside the box. Retain a shipping receipt as
evidence of shipment and as your protection against loss in shipment.
15