Specifications

5
when performing an operation where the cutting
accessory may contact hidden wiring.
Cutting
accessory contacting a “live” wire may make
exposed metal parts of the power tool “live” and
could give the operator an electric shock.
Drill safety warnings
- Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
- Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
GENERAL SAFETY RULES FOR
CORDLESS MACHINE
WARNING
●
Do not use the battery pack other than for the
cordless machine of Nitto.
Use the battery charger and battery pack specified
by Nitto described in the instruction manual and
catalog. Use of a battery pack not specified by Nitto
may cause machine failure, injury or damage.
●
Do not use deteriorated battery pack.
Use of deteriorated battery pack may cause liquid
leak, heat generation or explosion of the battery.
●
Use proper method for charging.
Use a power source appropriate for the rated
voltage of the battery charger. Do not use power
source of direct current or engine generator. It may
cause failure or fire.
Do not charge the battery pack when the
temperature is less than 0°C or over 40°C. It may
cause explosion or fire.
Charge the battery pack at a well-ventilated area.
Do not cover the battery pack or battery charger with
a cloth, etc. It may cause explosion, smoke or fire.
When not in use, unplug the power supply plug of
the battery charger from the electric outlet. Leaving
the machine plugged may cause electric shock,
smoke or fire.
●
Do not use or charge at an area where there is
flammable liquid or gas.
It may cause smoke, ignition or explosion.
●
Do not use or charge in rain or at damp or wet
areas.
It may cause electric shock or smoke.
●
Do not short circuit between terminals of the
battery pack.
Short circuit by water, cutting chips and other
conductive materials may cause smoke, ignition or
explosion.
●
Be careful of electric shock.
Do not touch the power supply plug, terminals or
their peripheral areas of the battery pack and battery
charger with wet hands. It may cause electric shock.
●
Turn the switch of the machine off and disconnect
the battery pack from the machine in cases
described below.
When not in use or when repairing.
When replacing accessories such as a drill.
When work is finished and storing the machine.
When other dangerous situation is assumed.
●
Avoid abrupt starting.
Check that the switch is turned off before attaching
the battery pack. Do not touch the arbor or drill when
attaching the battery pack.
●
Use specified accessories and attachments.
Use specified accessories and attachments
described in this instruction manual and Nitto
catalog. Use of other accessories and attachments
may cause an accident or injury.
●
Do not place the battery pack in fire.
It may cause ignition or explosion.
●
If the liquid of the battery pack leaks and gets into
your eyes, do not rub your eyes but immediately
wash your eyes with plenty of clean water such
as tap water and consult with a medical doctor.
●
If the liquid of the battery pack leaks and comes
into contact with your skin or clothing,
immediately wash with plenty of clean water and
consult with a medical doctor since it may cause
skin infection or injury.
●
Pay attention that the battery pack is clean from
chips and dust.
Prevent chips to fall on the battery pack when
working.
Do not leave the battery pack where chips or dust
accumulate when the battery pack is not in use.
Clean off chips and dust when storing the battery
pack and store it separately from metal parts.
Do not stick a nail or apply strong impact to the
battery pack.
●
Do not apply heat or high pressure to the battery
pack by putting it in a microwave or in a
pressurized container.
●
Immediately move the battery pack away from fire
when any leaking or smell is identified.
●
Do not use the battery pack for other devices.
●
Stop charging the battery pack when charging is
not completed even after the specified charging
time is significantly exceeded.
●
Do not use the battery pack that has external
damage or significant deformation.
●
Do not use at areas where strong static electricity
is generated.