Operation Manual

155
Reading of Stored Programs
You can read programs stored in the PGM1 or PGM2 mode.
■ Program reading sequence
To read those programs stored in the PGM1 or PGM2 mode, use the following procedure:
1. Select the PGM1 mode or PGM2 mode from the mode selection window.
2. Select “1 READING” from the PGM1 or PGM2 mode menu to display the items list.
3. Select an item listed in the table shown later.
4. Where “RANGE” and/or “PICK UP” are displayed on the screen, select either option. Select “RANGE” to
read program by range, and “PICK UP” to read program by picking up codes. The procedure to specify a
range or to pick up codes are the same as the one in sales report.
On the table, for the item you can specify a range, “
*
1” is indicated, and for the item you can pick up
codes, “
*
2” is indicated.
Item: Description: Available mode:
1 DEPARTMENT *
1
Department PGM1 or PGM2
2 PLU/EAN *
1
*
2
PLU/EAN PGM1 or PGM2
3 SET PLU TABLE Set PLU table PGM2
4 LINK PLU TABLE *
1
Link PLU table PGM2
5 PROMOTION TABLE Promotion table PGM2
6 EAN OTHERS EAN other functions PGM2
7 FUNCTION Function PGM1 or PGM2
8 MEDIA Media key PGM2
9 TRAINING CLK/CSR Training clerk/cashier PGM2
10 CLERK Clerk PGM1 or PGM2
11 CASHIER Cashier PGM1 or PGM2
12 MANAGER Manager PGM2
13 OPTIONAL Optional feature PGM2
14 REPORT Report PGM2
15 FUNCTION TEXT Function text PGM2
16 MESSAGE Message PGM2
17 AUTO GENE. GLU GLU code PGM2
18 TAX Tax PGM2
19 AUTO KEY SEQ. Automatic sequencing key PGM2
20 DEVICE CONFIG Device configuration PGM2
21 DIRECT KEY Direct key PGM2
22 ONLINE CONFIG On-line configuration PGM2
23 VMP CONFIG VMP configuration PGM2
24 ROM VERSION ROM version PGM2
ER-A280F_N(SEEG)(E)-8 09.6.18 7:12 AM Page 155