Operation Manual

■ Inserting the keyboard sheet

Insert the keyboard sheet between the keyboard cover and the cabinet as illustrated below.

1. Turn over the keyboard cover.

2. Insert the keyboard sheet into the slit.

3. Close the keyboard cover.

• Do not spread the keyboard cover too far as it might tear the tabs.

• Replace the keyboard sheet with a new one if by chance it gets wet. Use of a wet keyboard sheet may

cause problems.

• Be sure to use only SHARP-supplied keyboard sheets. Thick or hard sheets make key operations difficult.

• Smooth the keyboard sheet evenly under the keyboard cover, without any folds or wrinkles, to ensure

easier operation.

• If you require a new keyboard sheet, please contact your dealer.

• The keyboard cover will eventually wear out. If your keyboard cover is dirty or broken, replace the cover

with a new one. For details, contact your authorized SHARP dealer.

NOTE

Keyboard sheet

Keyboard cover

ER-A280F_N(SEEG)(E)-1 09.6.12 11:09 AM Page 14