Operation Manual

177
■ Removing the receipt paper roll
When a red dye appears on the paper roll, it is time to replace the existing paper roll. Replace the paper roll
with a new one. If you plan not to use your register for an extended period of time, remove the paper roll,
and store it in the appropriate place.
1. Remove the printer cover.
2. Push down the print roller release lever to open the print
roller arm.
3. Remove the paper roll from the paper roll location.
Do not pull the paper through the printer.
■ Removing the paper jam
Caution: The paper cutter is mounted on the printer cover. Be careful not to cut yourself. Never
touch the print head immediately after printing, as the head may still be hot.
1. Remove the printer cover.
2. Push down the print roller release lever to open the print roller arm.
3. Remove the paper jam. Check for and remove any shreds of paper that may remain in the printer.
4. Reset the paper roll correctly by following the steps in “Installing the receipt paper roll”.
NOTE
ER-A280F_N(SEEG)(E)-9 09.6.18 6:56 AM Page 177