Instruction manual

44
Sign (+/-) and tax status
For each PLU
For a range of PLUs
* Item: Selection: Entry:
A Sign (+/-) Set as a plus PLU 0
Set as a minus PLU 1
B VAT4 or TAX4 Assign “non-taxable” 0
Assign “VAT4 or TAX4” 1
C VAT3 or TAX3 Assign “non-taxable” 0
Assign “VAT3 or TAX3” 1
D VAT2 or TAX2 Assign “non-taxable” 0
Assign “VAT2 or TAX2” 1
E VAT1 or TAX1 Assign “non-taxable” 0
Assign “VAT1 or TAX1” 1
• The tax system of your machine has been factory–set to automatic VAT1 – 4. If you desire to
select any of automatic tax1 – 4, manual VAT1 – 4, manual VAT1, manual tax1 – 4, and the
combination of automatic VAT1 and the automatic tax2 – 4, consult your dealer.
• When the combination of automatic VAT1 and automatic tax2 – 4 system is selected, one of the
TAX2 (D), TAX3 (C) and TAX4 (B) can be selected in combination with VAT1 (E).
Example: BCDE = 1001, 0011, 0101
• A PLU not programmed for any of these tax statuses is registered depending on the tax status of
the department which the PLU belongs to.
Note
2232
.
≈
≈≈
:
;
End PLU code
(1 - 999999)
*ABCDE
To apply the current
setting of start PLU code
to PLUs within the range
Start PLU code
(1 - 999999)
2211
.
≈
≈:
;
PLU code
(1 - 999999)
*ABCDE
To program for another PLU
To program zero.
To program for the following PLU
Procedure
Direct22322211
PGM 2
FOR THE MANAGER-1-A410/A420 02.4.20 6:48 PM Page 44