Instruction manual

78
Setting the time range for hourly reports
You can set the time range for an hourly report
.
*A: Time range
To set the time range to 30 minutes (in the 24-hour system), enter 0.
To set the time range to 60 minutes (in the 24-hour system), enter 1.
BC: Starting time (hour = 00 to 23)
To perform this setting, an hourly Z report (# 160) must be printed in advance.
Programming of power saving mode
* Item: Selection: Entry:
A Entering power save mode when Enable 0
time is displayed.
Disable 1
BCD Time (min.) to entering power save 1 through 254 (min.)
mode since no operation is made. (999: the power save mode is inhibited.)
2689
.≈
0030
;
PrintKey operation
Example
2689
.
;
*ABCD
≈
Procedure
2689
PGM 2
Note
2619
.≈
107
;
PrintKey operation
Example
2619
.
;
ABC
*
When A through C are all zeros
≈
Procedure
2619
PGM 2
FOR THE MANAGER-2-A410/A420 02.4.20 6:49 PM Page 78