Operation Manual

81
RS-232C channel assignment
Your register is equipped with two RS-232C interfaces. If you use the on-line communication function, the
channel number of each RS-232C interface must be programmed by using the following procedure.
To activate the on-line communication, consult your dealer.
** P: 1
* Item: Selection: Entry:
A Channel no. for the ON-LINE communication Not connected 0
Standard channel 1 1
Standard channel 2 2
B Always enter 0. 0
C Always enter 0. 0
D Always enter 0. 0
** P: 2 (ABCD: Always enter 0.)
** P: 3
* Item: Selection: Entry:
A Always enter 0. 0
B Channel no. for the slip printer Not connected 0
Standard channel 1 1
Standard channel 2 2
C Always enter 0. 0
D Always enter 0. 0
• Never enter any number other than 0, 1 and 2.
• EFT function always uses standard channel 2.
• Data backup function always uses standard channel 1.
2690
.≈
3
≈
0100
:
;
PrintKey operation
Example
Note
2690
.
≈
≈
:
;
P
*ABCD
(1 - 3)
**
To program zero
Procedure
2690
PGM 2
FOR THE MANAGER-2-A410/A420 02.4.20 6:49 PM Page 81