Service manual

14 OF 14
ER-A Model SRV (Service) Mode – File Allocation Overview
INSTRUCTIONS FOR PROGRAMMING FILE ALLOCATION
1 Before you start any programming, it is recommended that you check the available memory.
2
Before you start programming memory allocation, you should consult with your customer to
determine how much and what size file memory is necessary.
3 When allocating File Groups, it is important to note which individual file tables are affected.
4
When allocating File Groups, observe the contents printed on the Journal Printer. If there is a
problem with the allocation such as no available memory, it will be indicated on the Journal Printer.
5
Upon completion of File programming and prior to returning to REG Mode or any other MODE, a
Program Reset is required/mandatory.
6
When making changes to multiple Files, complete all File programming and then perform a
Program Reset.
DOCUMENTATION – varies by model
1
Sharp POS Instruction, Service, Programming and Parts manuals and Procedures Guide are
available on www.sharp-pos.com
- Technical Manuals link.
DEMO TEMPLATES - varies by model
1
Demo templates are available on www.sharp-pos.com
– Document/Download Library - Software
link.
Page 65 of 108