Operation Manual

125
Programming
This chapter explains how to program various items.
Before you start programming, select the PGM1 or PGM2 mode from the
mode selection window depending on the item you are going to program.
Basic Instructions
This section illustrates the basic programming by using an example of programming for departments.
13
PGM1 MODE
PGM2 MODE
AUTO KEY MODE
Procedure
Programming example
The following example shows how to program 2.00 for the unit
price, “ABCDE” for the description, and “taxable 2 yes” for
department 1.
1.
In the PGM2 MODE window, select “2 SETTING” by using
the
·
or
°
key and press the
E
key.
• The SETTING window will appear.
• You can also select “2 SETTING” by using numeric key “2,”
then press the
E
key.
• If you return to the previous screen, press the
C
key.
2.
Select “1 ARTICLE.”
• The ARTICLE window will appear.
The arrow mark in the upper-right corner of the window shows
that the window contains more options than are now on the
screen. To scroll the window, press the
Î
key.
To return to the previous page, press the
¨
key.
3.
Select “1 DEPT.”
• The DEPT window will appear, listing programmable
departments.
NOTE
NOTE
E C
E C
E C
~ER-A750(SEEG)-8 97.3.31 3:48 PM Page 125