Operation Manual

139
Condiment table
The “condiment entry” is intended to guide the operator in making menu entries which require special
cooking instructions. For example, a clerk can make such entries as “garnishing potato,” “with salad,” and
“grilling steak rare.” When a clerk enters a menu-item PLU to which PLUs for the condiment entry have
been assigned, these orders (such as “garnishing potato”) will be printed on the receipt and conveyed to the
kitchen.
Before you program for the condiment entry, prepare a condiment table. The following shows an example of
a condiment table:
Condiment table
The condiment table should contain the following:
Condiment table: The condiment table is a group of condiment PLUs, which is assigned to each menu-item
PLU. A table consists of a “First PLU” and “Following PLUs.” It can contain one “First
PLU” and up to 19 “Following PLUs.”Also, you can assign the next condiment table
number to a condiment table to link them.
The “First PLU” is used for displaying a prompting message. The “Following PLU” is used
for the special order setting. For example, when a clerk enters a menu-item PLU, a
display message programmed for the “First PLU,” such as “HOWCOOK?,” will appear.
Then specify one of the “Following PLUs” programmed for text such as “RARE.”
Table number: The table number is intended to identify each condiment table.
22
(HOWCOOK?)
41
(WITH?)
31
(POTATO?)
62
(DRINK?)
First PLU
23
(RARE)
44
(SALAD)
33
(P.CHIPS)
63
(TEA)
25
(MED.RARE)
45
(FRUITS)
37
(MASHED.P)
65
(MILK)
27
(WELLDONE)
38
(BAKED.P)
67
(A.JUICE)
02
99
Table
number
01
02
04
99
PLU codes for condiment entry (programmed description)
Condiment
tables
(Up to 99)
Following PLUs (Up to 19) Next condiment
t
ab
l
e
n
u
m
be
r
Procedure
Program each item as follows:
• CONDIMENT TABLE (Use the numeric entry)
Condiment table number (1 through 99)
• NEXT LINK TBL# (Use the numeric entry)
Enter the next condiment table number (max. 2 digits).
• CONDIMENT PLUXX
Enter condiment PLU codes (max. 20 PLUs).
• The description of the first PLU (CONDIMENT PLU01) is used
as the display prompt.
• PLU codes should be defined before programming a condiment
table.
• If the
D
key is pressed on the table number selection menu,
the table in the cursor position will be deleted.
NOTE
~ER-A750(SEEG)-8 97.3.31 3:48 PM Page 139