Operation Manual

198
IR Data Send Programming
Use the following procedure to select the menu option “16 IR DATA SEND”:
IR data send
Your POS terminal can send data to another device by infrared rays.
Program each item as follows:
• TO (Use the selective entry)
Select one of the following options to send data to another
device:
ECR(IrDA): Selects “IrDA” for the communication
system to communicate with another POS
terminal.
ECR(ASK): Selects “ASK” for the communication
system to communicate with another POS
terminal.
ER-02FD(ASK): Selects “ASK” for the communication
system to communicate with the ER-02FD.
• SEND DATA (Use the selective entry)
Select one of the following options (data sources):
ALL RAM
STANDARD RAM
03MB/04MB(1)
03MB/04MB(2)
04MB(3)
04MB(4)
SSP
RESERVED 1
RESERVED 2
• SPEED (Use the selective entry)
Select one of the following options (data transmission
speeds):
PROGRAMMED SPEED: Sends data at a programmed
speed.
115200bps: Sends data at 115200 bps (for “IrDA” only).
57600bps: Sends data at 57600 bps.
38400bps: Sends data at 38400 bps.
19200bps: Sends data at 19200 bps.
9600bps: Sends data at 9600 bps.
4800bps: Sends data at 4800 bps.
2400bps: Sends data at 2400 bps.
Procedure
~ER-A750(SEEG)-9 97.3.31 3:53 PM Page 198