Operation Manual

201
Drink dispenser preset
Program each item as follows:
• VALUE NUMBER (Use the numeric entry)
• You can set the link of sort number of drink dispenser and
PLU code.
AAA: Value in the hundred thousand’s and ten thousand’s
and thousand’s place of a PLU code (0 through 999)
• The conversion of a sort number to a PLU code is made as
follows:
Sort number = xxx (max. 3 digits)
PLU code = AAAxxx (max. 6 digits)
You cannot change the setting by this option while the received
data on drink dispenser sales is stored in the buffer. In this case,
a lock error will occur and the message “ENTRY ERROR” will be
displayed.
• SEPARATE CODE (Use the numeric entry)
Enter a GLU/PBLU or drive-through separate code
(1 through 999999).
For example, if you program “10” for the separate code,
GLU/drive-through codes “1” through “10” are used for drive-
through codes, and “11” through “999999” are used for GLU
codes.
• CONNECTION (Use the selective entry)
OFF-LINE: Makes drink dispenser off-line.
ON-LINE: Makes drink dispenser on-line.
If “OFF-LINE” is selected, data reception from the drink
dispenser is disabled. If “ON-LINE” is selected, the manual
entry of PLU assigned to the drink dispenser sales article
results in error correction of drink dispenser misoperation.
• PRINT FORMAT (Use the selective entry)
NOT PRINT: Does not print a drink dispenser misoperation
item when reading a drink dispenser
misoperation file (in the clerk report).
PRINT: Prints a drink dispenser misoperation item
when reading a drink dispenser misoperation
file (in the clerk report).
NOTE
Procedure
~ER-A750(SEEG)-9 97.3.31 3:53 PM Page 201