Operation Manual

203
Automatic Sequencing Key Programming
If you program frequently performed key operations for the AUTO keys, you can enter those key operations
simply by pressing the corresponding AUTO keys in key operations.
To program an automatic sequencing key as follows:
1.
Press a pertinent automatic sequencing key which you want
to program.
2.
Enter the desired sequence to use the automatic sequencing
key in the programmed sequence.
3.
Press the automatic sequencing key again.
4.
Press the
M
key to finalize the programming.
ˇ
700
1 c
ˇ
Procedure
Select “7 AUTO KEY MODE” from
the mode selection window.
~ER-A750(SEEG)-9 97.3.31 3:53 PM Page 203