Operation Manual

Prior to Entries

Preparations for Entries

1. Select the REG mode from the mode selection menu by pressing the

key.

2. Insure that all printers in your system have adequate paper rolls prior to beginning entries. For more

information, please refer to the applicable printer’s manual.

Error Warning

In the following examples, your POS terminal will go into an error state accompanied by a warning beep and

the error message on the display. Clear the error state by pressing the

key and take a proper action.

• When you exceed a 32-digit number (entry limit overflow):

Cancel the entry and reenter a correct number.

• When you make an error in key operation:

Clear the error and try the entry again.

• When you make an entry beyond a programmed amount entry limit:

Check to see if the entered amount is correct. If it is correct, it can be rung up in the MGR mode.

Contact your manager.

• When an including-tax subtotal exceeds eight digits:

Delete the subtotal by pressing the

key and press a media key to finalize the transaction.

Sample Receipt

Time

Date

Machine no.

Clerk name/clerk code

Sales total

Consecutive no.

Item entry

Cash amount tendered

Change due

REG MODE

OPXZ MODE

~ER-A750(SEEG)-3 97.3.31 3:30 PM Page 25