Operation Manual

26
Clerk Assignment
Clerks can be assigned on four systems: real clerk key, clerk code entry, clerk entry key and WMF clerk key
systems. Contact your authorized SHARP dealer for their selection.
Real clerk key system (factory-set)
If you select this system, clerks can be assigned by inserting corresponding real clerk keys. Any registration
cannot be performed unless a real clerk key is inserted.
Clerk code entry system
If you select this system, clerks can be assigned by entering his or her clerk code in advance.
* The pop-up window for entering a secret code will appear after pressing the
˚
key.
The sign-off operation can be performed by using the following procedure in the REG or MGR mode:
To sign off a clerk:
˚
Clerk entry key system
If you select this system, clerks can be assigned by pressing corresponding clerk keys on the keyboard.
WMF clerk key system
If you select this system, clerks can be assigned by inserting WMF clerk keys.
If another clerk is signed on while a clerk is signed on, the latter will automatically be signed off.
Item Selection from the Menu Window
Your POS terminal allows you to select functions from a menu window. For example, if you want to enter an
item for check 1 sale, select the option “CHECK1” from the “CHECK” menu instead of pressing the
h
key.
Each menu can be opened as follows:
NOTE
XXXX
Clerk code
˚ e
XXXX
Secret code
*
Procedure
• PLU menu window
P
• Miscellaneous menu window
M
~ER-A750(SEEG)-3 97.3.31 3:30 PM Page 26