Instruction manual

X1 mode

Z1 mode

REG mode

OPXZ mode

OFF mode

PGM1 mode

PGM2 mode

X2 mode

Z2 mode

AUTO KEY mode

Selecting an Operating Mode

The POS terminal will display the following listing by pressing the

MODE

key.

Mode selection window

Operating Modes

You can select any mode other than REG from the list in the mode selection window. Your POS terminal

supports the following 11 operating modes:

This mode allows you to enter various sales information. The mode selection window

does not list this mode. To select this mode from the mode selection window, press

the

CANCEL

key.

This mode allows servers to take X or Z reports on their sales information. It can also

be used for the employee time function and GLU table assignments.

This mode temporarily locks all operations of the POS terminal. When you select this

mode, the backlight of the LCD is turned off. Pressing any key turns the POS terminal

on or prompts for a secret code if it has been preset.

This mode is used to take various daily reading reports (X1 reports).

This mode is used to take various daily resetting reports (Z1 reports).

This mode is used to take various weekly or monthly reading reports (X2 reports).

This mode is used to take various weekly or monthly resetting reports (Z2 reports).

This mode allows you to program unit price of PLUs.

This mode allows you to program those items which need to be changed often such

as unit prices and discount percentages.

This mode allows you to program those items which can be programmed in the PGM1

mode and do not require frequent changes such as date, time, and terminal functions.

This mode allows you to program automatic sequencing keys.

UNIT PRICE mode