Installation guide

PrPr

ammingamming

amming

Page / 15

Designs and specifications are subject to change without notice.

There are 3 different functions used in the Debitek Cash Card implementation. The functions are 1) Debit,

2) Partial Debit and 3) Eject. The specific Charge Media key is significant to the interface and

should be preset exactly as indicated on the following pages.

IMPORTANT: Only the specified Charge media keys may be used for the Cash Card interface !!!

1. Debit Finalization Key:

Entering the PGM2 mode may be achieved from the REG mode as follows:

1) Depress the [MODE] key

2) Select 9 PGM2 MODE

3) Select 2 SETTING

4) Select 5 MEDIA

5) Select 3 CHARGE

6) Select 1 CHARGE1

7) Set the following related CH1 Media key's presets;

8) Depress [CA/AT] when all settings are completed to exit to the PGM2 Charge Sub-Menu.

9) Depress [CANCEL] to exit the Charge Sub-Menu and return to the Media preset menu.

PROGRAMMING MEDIA KEYS

yeKaideM1HC

gnitteSdleiFretemaraP-detaleR

teserP

dednemmoceR

gnitteS

)ssorG(txeT1EGRAHCTIBED

)dnufeR(txeT-1EGRAHC-TIBED

redneTtrohSelbasiD/elbanE

elbasiD

noitarepOTACYROSLUPMOC-NONYROSLUPMOC2TAC

edoCnoitcA2TACELAS-GHCELAS-GHC

epyT.snarT2TAC1HC1HC

trP#draCoN/seYoN

.trPeniL.ngiSoN/seYoN

.trPredloHdraCoN/seYoN

.trPnoitaripxEoN/seY

tpcRforebmuN9-11

euDegnahCelbasiD/elbanEelbasiD

gninepOrewarDoN/seYoN

yrtnEtnuomAyroslupmoC/tibihnItibihnI