Instruction manual

2. Setting the terminal numbers (IRC machine numbers) —

master and satellite

It is assumed that your terminal’s setting for inline operations has been performed.

Enter the PGM2 mode.

Select “INLINE SETTING” and press the [ENTER]

key.

Enter a terminal number (0 - 254) and press the

[ENTER] key.

(For programming for BMA MACHINE No. and

SYSTEM RETRY, see pages 31 - 32.)

Repeat steps 1 to 3 for all machines in the IRC

system.

NOTE

•

Terminal numbers must be assigned to the master and each satellite in the IRC system.

(For setting the master’s terminal number, see the next paragraph.)

•

If an inline network contains two or more machines with the same terminal number, IRC

communications will not be achieved correctly. Each terminal number must be unique.

•

The terminal number should be within the range from 1 to 254.

•

If the terminal number “000” is programmed for a machine, it is put in the OFF LINE mode and

cannot take part in IRC communications.