Specifications

6
Operating the Scale
Make sure the platter is sitting properly on top of the platform and that
there is nothing on top of the platter. Also, make sure that the scale is
plugged into the proper outlet. Place the power switch into the ON
position. The scale displays will run through a self test, count down to
zero, and then beep. All of your displays should look as follows:
Simple Weighing:
1. Enter a unit price using the numeric keys and press the 1/2, 1/4,
or 100g keys if necessary
2. Place an item on the platter
3. Remove the item from the platter
Steps 1 & 2 can be interchanged. After step 2 you will notice that the
Total Price display will show the calculated Total Price. For example:
After step 3 you will notice that the displays will return to there initial
state of o.oo.
Simple Weighing Using Known Tares:
1. Enter a tare weight using the numeric keys
2. Press TARE
3. Enter a unit price using the numeric keys and press
the 1/2, 1/4, or 100g keys if necessary
4. Place an item on the platter
5. Remove the item from the platter