Specifications

.
If you connect the F-2700M to your computer and turn it on before you install the
Windows Printing System software, the F-2700M’s printer driver will automatically be
set to the parallel port being used (usually LPT1) when the installation process is
completed. The printer drivers which were set to this port before the Windows Printing
System was installed will all be set to File.
If you need to change the port setting for the F-2700M, follow the steps below.
Windows3.1 and Windowsfor Workgroups3.lx
1. Double-click the Control Panel icon in the Main window of Program Manager.
2. Double-click the Printers icon. The Printers window will open.
3. If another printer is already installed on the port on which you want to install the
F-2700M, select that printer from the installed Printers box, and then click the
Connect button (otherwise, go to Step 5).
4. Select File from the Ports box, and then click the OK button. You will return to the
Printers window.
5. Select the F-2700M from the Installed Printers box, and then click the Connect
button.
6. Select the port you want to use from the Ports box, and then click the OK button.
7. Click the
Windows95
1.
2.
3.
4.
5.
6.
Click the
Set As Default Printer button, and then click the Close button.
Start button in the task bar.
Select Settings and then click Printers in the Settings group.
If another printer is already installed on the port on which you want to install the
F-2700M, click its icon with the right mouse button, and then click Properties
(otherwise, go to Step 5).
Click the Details tab in the Properties window, select File: from the Print to the
following port box, and then click the OK button. You will return to the Printers
window.
Click the icon for the F-2700M with the right mouse button, and then click
Properties.
Click the Details tab in the Properties window, select the port, and then click the
OK button.
PRINTING SETUP
3-7