Specifications

SENDING DOCUMENTS
Speed Dialling
If the number you want to dial has been stored as a Speed Dial number, you can dial
it by pressing the SPEED key and then entering the 2-digit number (see “Storing
Numbers for Automatic Dialling” in Chapter 2).
1
SPEED
ABC
DEF
mm
JKL
MNO
ma
R
*V
o
a
‘9
()
Press the SPEED key and then enter
the two digits of the Speed Dial
number by pressing the number keys.
. To enter numbers 1 through 9, first
enter Oand then the number.
2
START
Check the display. If the name or
n
number shown is correct, press the
o
START key. (If not, press the STOP
h
key and then repeat Step 1.)
Chain Dialling
An automatic dialling number set for Chain Dialling (see “Storing Numbers for
Automatic Dialling” in Chapter 2) can be combined with another automatic dialling
number or digits entered manually with the numeric keys to dial one phone number up
to 50 digits long. The following are some examples of how this can be done:
Press appropriate Rapid Keys in the proper order. For example, press Rapid Key
01, then Rapid Key 02.
Enter Speed Dial numbers in the proper order. For example, press the SPEED key
and “22”, then the SPEED key and “23”. Press the START key after the final
number to begin transmission.
Press a Rapid Key and then manually enter a number by pressing appropriate
numeric keys. Press the START key after the final numeric key to begin
transmission. (Use this method, for example, when you have stored a long distance
access code into a Rapid Key, and want to dial this in combination with a number
which hasn’t been stored as an automatic dialling number. )
4-8
BASIC OPERATIONS
.