Specifications

.
,.
.. .
...
OPTIONALA.M. Connection SE1l’lNGS
..’..-
If necessary, you can use the following settings to improve the response of the
answering machine connection to incoming calls.
This function causes the fax machine to take over the line and begin reception if a
certain duration of silence is detected after the answering machine answers.
Time selections for the period of silence are 1 to 10 seconds. Quiet
Detect Time has
been set to 4 seconds at the factory. This gives the best performance with most
answering machines;
however, you may need to adjust this setting depending on the
disconnect time of your answering machine.
Some answering machines may have unusually fast disconnect times (equal to or
very slightly less than 4 seconds), which means that the answering machine may
disconnect the line before fax reception can begin. In this case, try a Quiet Detect
Time setting of about 3 seconds.
If the fax machine is interrupting callers before they can leave a message, try a
longer Quiet Detect Time setting. If your outgoing message includes a period of
silence, make sure that the setting is longer than that period of silence, or re-record
your outgoing message to shorten the silence,
Note: Quiet Detect ~me can be turned off by entering “00” for the time. Note, however, that
the fax machine ‘wiilnot be able to receive faxes sent manually by Normal Dialling.
I Step
‘ Press these keys:
Comments
——
FUNCTION
1 ; (—- o
A.M. MODEwill appear in the display.
,
I
2’
m
QUIET DETECTTM. will appear in the display.
-i
I
am
Set the time by entering a two-digit number
3
equal to the number of seconds (“01” to “1O“
(Example) seconds), or enter “()()” to turn off the function
—
——
.——
STOP
4 :
o
6
~
Exit.
—
ANSWERING MACHINE CONNECTION
5-5