Specifications

MEMORY
4
Press the START key if you entered a
START
o
Speed Dial number or a full number.
o
I
● The document is first scanned and
stored in memory. The other machine
h
is then dialled (redialling will be
performed automatically if necessary).
When the connection is made,
transmission begins. Afterwards, the
document is cleared from memory and=
your fax returns to standby mode.
If the memory becomes full...
If the memory becomes full while the document is being scanned, MEMORY FULL will
appear in
the display.
Press the START key if you want to transmit the pages which have been stored up
to that point in memory. The remaining pages will be ejected from the feeder. After
transmission, the memory will be cleared and you can transmit the remaining
pages. You will also need to transmit the page which was being scanned when the
memory filled up.
Press the STOP key if you want to cancel the entire transmission.
This is a back-up function which is automatically activated if your fax runs out of
paper, the imaging cartridge needs replacement. or the paper jams.
When you have received a document in memory. FAX RX IN MEMORY will appear in
the display, alternating with CHECK PAPER, REPLACE TONER, or PAPER JAM.
When you add paper, replace the imaging cartridge, or clear the jam, the stored
documents will automatically be printed out.
+ If you received documents in memory because the fax ran out of paper, be sure to
add paper which is the same size as the paper previously used. If not, the
document print-out size may not match the size of the printing paper.
Caution!
When documents are stored in memory, do not turn the poweroti This will erase all of the
contents,
If documents received in memory are lost due to a power failure or other interruption of the
power suppiy, a “CLEAR REPORT’i will be printed out when the power is restored. ~is gives
information about the receptions iost, including the fax numbers of the transmitting machines
if they are available.
6-2
SPECIAL FUNCTIONS