Specifications

OPTIONAL SETTINGS
Setting4:
ACTIVITY REPORT AUTO LISTING
Press
““l” (YES)” to have your fax automatically print out an Activity Report once every 30
operations. (The list can still be printed out manually when desired.) Press “’’2” (NO)” to turn
automatic print-out off.
. Factory setting: “2”
Setting5: TRANSACTION REPORT PRINT SELECT
This sets the condition for printing out Transaction Repofls. Enter a number from “1”to
“5”as
follows:
“1“(ALWAYS PRINTS):
Print out after each transmission, reception, or error.
“2” (ERR/’TlMER/MEM.):
Print out only after an error, a timer operation, or a memory
operation.
“3” (SEND ONLY):
Print out only after a transmission.
“4” (NEVER PRINT):
Never print out.
“5” (ERROR ONLY):
Print out only after an error occurs.
. Factory setiing: “5”
Setting6: AUTO FAX/PHONE CHANGEOVER
Press”1” (YES) to have your fax detect whether incoming calls are voice calls or fax
transmissions in automatic reception mode. Press “2” (NO) to turn the function off.
. Factory setting: “2”
Setting7: PSEUDO RINGING DURATION
This sets the duration of pseudo ringing when Automatic FatiPhone Changeover is turned on.
Enter a number from “1”to “2” as follows:
“1” (15 SEC.):
15 seconds
“2” (30 SEC.):
30 seconds
. Factory setting: “1”
Setting8: TEUFAX REMOTE NUMBER (TRANSFER CODE)
This sets the 1-digit number for activating fax reception from an extension phone, Enter any
number from “O”to “9”.
● Factory setting: “5”
Setting 9: REMOTE RECEPTION SELECT
This turns detection of the code for activating fax reception from an extension phone on or off.
Press “1” to turn detection on, or “2” to turn detection off.
. Factory setting: “1”
Setting10: FAX SIGNAL RECEIVE
Your fax is set to automatically begin reception if you hear a high-pitched fax tone after
answering a call. If you use a computer fax modem on the same line, you must turn this setting
off in order to prevent your fax from mistakenly attempting to receive documents sent from the
computer fax modem. Press “2” to turn the setting off, or”1” to turn it on.
● Factory setting: “1”
7-2
OPTIONAL S~lNGS
.