SHARP AQU OS LC-40LE700 LC-46LE700 LC-52LE700 LiQUiD CRYSTAL TELEVISION Ti_L_:VISE TELE_ DE C MODE MAN[ 1.41E:IlITII! [][] DOLBY TM DIGITAL 1 NYCE HIGH DEFINITaON IMPORTANT • Please read this operation IMPORTANT • Veuillez lire ce mode d'emploi manual before starting avant de commencer IMPORTANTE • Lea este manual de operaci6n antes de comenzar MULTIMEDaA operating INTERFACE the equipment. & utiliser I'appareil. a operar el equipo.
LC-40LE700U LC-46LE700U LC-52LE700U LiQUiD CRYSTAL TELEViSiON ENGLISH OPERATION IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV. iMPORTANT WARNING: Serial No.: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
iMPORTANT iNFORMATiON WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment approved by the manufacturer could void the user's authority to operate this equipment. not expressly CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp of trouble-free operation of your product, using this product. iMPORTANT Liquid please Crystal Television. read the important To ensure safety and many years Safety instructions carefully before SAFETY iNSTRUCTiONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
iMPORTANT SAFETY iNSTRUCTiONS Outdoor Antenna Grounding - If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
iMPORTANT SAFETY iNSTRUCTiONS Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE iSSUE o The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer's recommendations.
Supplied Accessories Make sure the following accessories are provided with the product. Remote control unit "AAA" size battery Stand unit Operation manual (x 1) (x 2) AC cord (x 1) Cable clamp (x 1) (x 1) (x 1) Page 7 Page 8 Page 7 Page 7 Page 6 J Always use the AC cord supplied with the TV. The illustrations above are for explanation purposes and may vary slightly from the actual accessories. To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning.
QUICK REFERENCE 1 Attach your antenna to the back of the television. (See page 8.) 2 Connect the AC plug for the television into the AC outlet. Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. 1T (5 m) 3O I • Place the TV close to the AC outlet, and keep the power plug within reach.
Preparation To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. f _ 1 .A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (Commercially available). 75-ohm coaxial cable (round) 2.
Contents iMPORTANT iNFORMATiON ..................... Trademarks ....................................... DEAR SHARP CUSTOMER ....................... iMPORTANT SAFETY iNSTRUCTiONS ........ Supplied Accessories 1 2 3 3=5 ............................ 6 QUICK REFERENCE Attaching the Stand ............................ QUICK INSTALLATION TIPS ................... Using the Remote Control Unit ................. 6 7 7 Preparation Antennas .......................................
Part Names ! II _ i Y / I I ........ ® ® / @ [ @ _ L _ _ .............................................. Blue Illumination LED (See page 25.) OPOsens°r*(Seepage21) h Remote control sensor / | oPcindicator page 21.)| POWER indicator (See (See page 14.
Part Names 1 1 18 _ ! 19 2 DISPLAY: 3 SOURCE POWER: Turns the power of the external equipment on and off, 4 External equipment equipment, 5 0---9: Set the channel, (See page 15,) 6 • (DOT}: (See pages 15 and 36,) 7 NET: Switches the display to the Sidebar Widget, TM + Web, Web or lM screen, (See pages 46 to 52 for details,) 8 INPUT: Select a TM input source.
Connecting For connecting to External Equipment the TV to external equipment, use commercially available cables. • To protect equipment, always turn off the TV before connecting any external equipment. Please read the relevant operation manual (Bid-ray disc player, etc.) carefully before making connections. You can connect many types of external equipment to your TV like a Bid-ray disc player, DVD player, VCR, Digital TV tuner, HDMI equipment, game console or camcorder.
Connectingto E×ternalEquipment iNPUT 5, 6, 7 or 8 iNPUT 6 HDMI-certified cable When using HDMJ=DVI conversion cable: HDMI-DVI conversion cable ® 3.5 mm stereo minijack cable 22 ,, When using an HDMI-DVI conversion cable, input the audio signal to the AUDIO terminal of INPUT 6. When you input the audio signal via the AUDIO terminal with INPUT 6, set "PC Audio Select" to "Input 6 (HDMI)". (See page 44.
Watching TV Press POWER turn the power _1 POWER on the TV, or TV POWER on. on the remote control unit to o POWER indicator (Green): The TV is on. (After a few seconds, a window appears with sound.) o The initial setup starts when the TV powers on for the first time. If the TV has been turned on before, the initial setup will not be invoked. For changing the settings of the initial setup, perform EZ setup on the Setup menu on page 24.
Direct Button Operation FREEZE MENU Allows you to set a time when the TV automatically switches to standby. Press SLEEP. Theremainingtime displayswhen the sleep timerhas beenset. Each time you press SLEEP, the remaining time switches as shown below. @_o OOO ®®® ®QO ®@@ C@8 Off u, 30 u, 60 _ t @@ INPUT FLAS_SACK 90 _* 120 I When set, the time automatically starts counting down. If you want to adjust the sleep timer, you can press SLEEP twice then change the time setting.
Direct Button Operation AV MODE gives you several viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment. Press AV MODE. Current AV MODE displays. = Press AV MODE again before the mode displayed on the screen disappears.
Direct Button Operation 1 Allows you to set the Power Saving level in order to decrease the power consumption and increase the backlight lifespan. Press POWER SAVING. = Eachtime you press POWER SAVING, the mode changes as shown below. Off ,m, Standard t ,_' Advanced ! Press CO. = This will present the Closed Caption information display. 2 Press CC while the Closed still on the screen. Caption information is = Press repeatedly until you select the desired closed caption service.
Direct Button Operation You can select the screen size. iooo Ji ,° 1 Press VIEW MODE. o The View Mode menu displays. The menu lists the View Mode options selectablefor the type of video signal currently being received. 2 Press VIEW MODE or A/V while the View Mode menu is displayed to select a desired item on the menu. You can sequentially select a View Mode that has its own aspect ratio.
On=Screen Display Menu _ Example LCFONT embedded Example [_ Option IIIIIIIIIIIIIIIIIIIIIIIIIIII PC Audio ® Select ® ® ® (1._ Item displayed in yellow o This indicates the item currently selected. o Press ENTER to go to the adjustment screen for this item. T_he } bar above is an operational guide for the remote control. The bar will change in [ accordance with each menu setting screen. (i._ Press 4/_ to select the desired item. (_ Press A/T to select the desired item. (.
On=Screen Display Menu o When AV MODE is set to "INTELLIGENT", part of the menu may not be displayed correctly or the setting range of the menu may be changed. o Some menu items may not be displayed depending on the selected input source. o When configuring a menu, be sure to select the input source according to the menu items to be configured. If a menu is not displayed, check whether one of the following may be the source of the problem. •1 The TV is connected to the Internet (HTML mode).
On=Screen Display Menu Adjusts the picture to your preference following _icture settings. Automatically adjusts the brightness of the screen. Off: The brightness is fixed at the value set in "Backlight". On: Automatically adjusts. On: Display: Displays the OPC effect on the screen while adjusting the brightness of the screen. with the Example Picture ] = When set to "On", the Optical Picture Control (OPC) senses the surrounding light and automatically adjusts the backlight brightness.
On=Screen Display Menu Use Fine Motion Enhanced to view fast-action video more clearly. On" For obtaining a clearerimage. Off: Normal image. = FineMotion Enhanced may cause image noise. If this occurs, turn the function "Off". = "Digital Noise Reduction" is not available during PC format input. Automatically adjusts the image contrast according to the scene. On: Automaticallyadjusts the image contrast. Off: No adjustment. Provides high quality images and cross color noise.
On=Screen Display Menu CmmrmuYou can adjust the sound quality with the following settings. to your preference Power control settinc allows you to save energy. Example Example FREEZE _J [ _ Audio Power Control ] MENU o -- ®j FAVORITECH ®©©@ -- I i 1 Press MENU to display the MENU screen, and then press _1/1_ to select "Power Control". 2 Press A/V to select a specific adjustment item, and then press ENTER. 3 Press A/T (or 4/1_) to select the desired setting, and then press ENTER. ......
On=Screen Display Menu If initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels. Air/Cable: Make sure what kind of connection is made Example with your TV when selecting "Air" or "Cable". OH Search: Channel auto search makes the TV look for all channels viewable in the set area. FREEZE MENU O @ ¢ m g FAVORITECH m ®®@® AqUOS 1 Press MENU to display the MENU screen, and then press _1/1_ to select "Setup".
On=Screen Display Menu For adjusting a picture's horizontal and vertical position. H-Pos.: Centers the image by moving it to the left or right. V-Pos.: Centers the image by moving it up or down. o For resetting adjustments to the factory preset values, press A/T to select "Reset", and then press ENTER. When connecting a PC to the HDMI terminal, the image position will be automatically adjusted. It cannot be manually adjusted. The screen position variable ranges depend on the View Mode or the signal type.
On=Screen Display Menu TV Parental Guidelines V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your TV. "V-Chip" and "Status" will not be selectable from the menu if you do not first configure your secret number. = The U.S.
On=Screen Display Menu Canadian Rating Systems (Canadian English ratings and Canadian French ratings) . The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. . While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes. .
On=Screen Display Menu If the image does not come in clearly from the external equipment connected to INPUT 1 or INPUT 2, you Example _ may "Input need Select" to change the input signal type setting the menu. Option on [] INPUT 1 Select the input signal type from the list below: Auto/COMPONENT/ViDEO [] INPUT 2 Select the input signal type from the list below: Auto/COMPON ENT/S=TERMINAL 1 Press MENU to display the MENU press 4/1_ to select "Option".
On=Screen Display Menu Select the video signal system compatible with your equipment from the list below: Auto/NTSC/PAL=M/PAL=N o "Color System" can only be set for the INPUT 1 VIDEO, INPUT 2 S-VIDEO and INPUT 3 VIDEO. If you have already set the Secret No., input the 4-digit secret number here. See page 25 for setting a secret number. This function allows you to adjust the closed caption screen appearance to suit your preference.
On=Screen Display Menu This setting allows you to optimize the settings of Digital broadcasting. Example [_ DigitalSetup This function allows software updates by inserting a USB memory device with the update file into the USB terminal on the TV. To check for the availability of a software update, visit www.sharpusa.com. If you have any questions, please call 1-800-BE-SHARP (800-237-4277). ] i FREEZE il I / li......
On=Screen Display Menu 5 Press ENTER to start checking the data in the Press ENTER USB memory device. 6 to start updating. The screen becomes dark for a while until the update screen can be displayed. Please wait for the update screen to appear. Do not unplug the AC cord. During the data checking, "Checking" blinks. The current version of the %/software and the version of the update file on the USB memory device are displayed.
Enjoying photo and music playback You can enjoy viewing photos and listening to music from external USB memory devices. o Depending on the USB memory device, the TV may not be able to recognize the recorded data. o Use only alphanumeric characters for naming files. File names over 80 characters (may vary depending on character set) may not be displayed.
Enjoying photo and music playback ENTER A/_'/_/I_ A (red) B (green) C (blue) o When there are invalid music files, the X mark will be displayed for the file. o The displayed play time may differ slightly from the actual play time depending on the files. D (yelJow) o When there are invalid photo files, the X mark will be displayed for the file.
Enjoying photo and music playback Specify the length of time before the next image appears. Change to Music Mode * 1 Press D to display the USB MENU screen. 2 Press A/T' to select "Slide Show Interval", and then press ENTER. 3 Press A/T to select the length of time, and then press ENTER. Select the images to be displayed. * The display varies depending on the selected mode. When Photo mode is selected, "Change to Music Mode" is displayed.
Enjoying photo and music playback = You can select the music to be played in the background while the slide show is being displayed. ! ;o -- FAVORITECH You can select the music to be played back 1 Press D to display 2 Press A/T to select "Select then press ENTER. The list screen is displayed. the USB MENU screen. 3 Select the music. o Checkmarks are added to the selected music. Auto Play Music", and -- ®®@® 1 Press D to display the USB MENU screen.
Other Viewing Options You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function of your remote control unit. To operate the connected equipment, press FUNCTION to select the LED for your device. (VCR, AUDIO, CBL/SAT (cable converteO or BD/DVD.) The LED lights up, and the remote control unit button will function as follows. o When you operate VCR or DVD, press iNPUT to select the terminal connected to your device.
Other Viewing Options Manufacturer codes VCR BRAND Akai Audio Broksonic Canon Capehart Craig Curtis Mathis Daewoo DBX Dynatech Emerson Fisher Funai G.E.
Using AQUOS LINK What's AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactivelyoperate compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD). By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AV amplifier using the remote control of the TV. AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control.
Using AQUOS LiNK :o i FREEZE When multiple AQUOS LINK-compatible devices are connected, this function allows you to set the recorder for recording when you press REO on the TV's remote control unit. o MENU 1 Press MENU to display the MENU screen, and then press 4/!_ to select "Option". Press A/V 2 Press A/T' to select "AQUOS LINK Setup", and then press ENTER. 3 Press A/T ENTER. Selecting to select the recorder for recording.
Using AQUOS LiNK AQUOS LINK allows you to operate the HDMIconnected equipment with one remote control. SOURCE LIGHT Recorder EPG REO Press I_ to start playing back a title. = The last played program is played back. You can use the following buttons during broadcast viewing. SOURCE POWER _ Turns the power of the HDMI connected devices on and off. Hold down to go in reverse. Starts playback. _ Hold down to fast forward. [] Playback stops. | | Sets pauses and still pictures.
UsingAQUOS LiNK This section explains how to play back a title in the AQUOS LINK-compatible equipment. 1 Power on the AQUOS LINK-compatible equipment, and select appropriate external input. 1 Press OPTION to display the AQUOS LINK MENU screen. 2 2 Press OPTION to display the AQUOS LINK MENU screen. mode change", and o The sound mode changes each time you press ENTER. o Refer to the operation manual of the AQUOS LINKcompatible audio system for details.
Using a PC When using HDMI cable: iNPUT 5, 6, 7 or 8 HDMI-certified cable HDM,-DV, conversio cab,e, iNPUT 6 ('__ o3.5mm stereo miniiack cabl When using analog RGB cable: iNPUT 1_ © 3.
Using a PC ' I You can select the screen size. Iooo ! I ,N o 1 Press ViEW MODE. o The View Mode menu displays. o The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or A/V while the View Mode menu is displayed to select a desired item on the menu. • You can sequentially select a View Mode that has its own aspect ratio. o Connect the PC before making adjustments. (See page 42.
Using a PC Determines 1 Press MENU to display the MENU screen, and then press 4/1_ to select the Setup or Option menu. . For adjusting "Auto Sync." or "FineSync.", select the Setup menu. . For setting "PC Audio Select", select the Option menu. 2 Press A/V to select a specific adjustment item, and then press ENTER to set each item. 3 Press A/V (or 4/1_) to select or adjust the desired setting, and then press ENTER. For automatically adjusting the PC image. Yes: Auto Sync.
Using a PC [] PC control of the TV • Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections. [] Command format Eight ASCII codes ÷ OR I Command 4-digits o This operation system should be used by a person who is accustomed to using computers. [] Communication conditions Set the RS-232C communication settings on the PC to match the TV's communication conditions.
Using the Internet • By connecting your TV to a broadband system, you can access the Internet from the TV. Display the "Sidebar Widget" on the screen to check out the latest Internet information and access a range of useful information for AQUOS users from the original home page*. • About the original home page The original home page is a website set up specifically for AQUOS owners.
Using the Internet Ii If you cannot connect to the Internet Perform the procedures below to check your TV's network settings. Perform the steps below to display the Sidebar Widget on the screen and view the latest Internet information. l: / i.......... i QO, i®®® ®®® Q® ; io i o ¢ gJ @ 'V Ld O0 INPUT 0V.' VOL FLA£ BACK OH ...... g' 5%H SAnG E FREEZE MENU O O C®9 1 Press EXIT to display the normal TV screen.
Using the Intemet When you are editing an input screen or specifying the Ethernet settings used for accessing the Internet, enter text from the software keyboard. Caps Off/Caps On/Caps Lock If "alphabet" is selected in "Character Set", this switches characters between uppercase and lowercase.
Using the Intemet I Q°Q°Ji FREEZE QQQj io MENU o ®®® '5 [ j g g ENTER, A/V/4/I_ o Press A/Y/4/I_ to select a link that you want to jump, and then press ENTER. EXIT About links • Web pages on the Internet often include "links" that allow you to jump to other web pages (or sites). "Links" can take various forms, including words or images, but they always work in the same way letting you jump to the link destination when you select them.
Using the Intemet You can use the toolbar specify to control the browser and to settings. You can use tabs to view up to 3 web pages at the same time. Each page appears in a separate tab, and you can switch between the tabs. 1 SOURCE LIGHT EE) QE3 (ED REC (]D (3D OO (_E)EE) @ OQQ QQQ (2) QQ (Z) QQ VOL OH sang FREEZE 0 ¢ g CH -- ®®@® 1 Press D on the remote toolbar. 2 Press 4/_ ENTER.
Using the Internet Adding a web page to your bookmarks allows you to return to that page later by simply selecting it from your list of bookmarks. You can rearrange or delete the bookmarks. m Switching between the URL and title name 1 Press D on the remote control unit to display the toolbar. 2 Press 4/1_ to select "_" SOURO LIGHT GE) OD REC (3D (3D (ED CE) C_>QQ QQQ QQQ Q@@ Rearranging ©© INPUt VOL in the toolbar, and then press ENTER. Your bookmarks list is displayed.
Using the Intemet You can check or modify your browser the Browser menu. The Browser menu includes a display and a security settings menu. settings settings from menu @ -- FAVORITE CH -- ®®@@ 1 Press D to display the toolbar. 2 Press 4/_ to select "_" in the toolbar, and then press ENTER. 3 Press 4/_ to select the settings menu you want to access. 4 Press A/V to select and confirm the item you want to set. 5 Press A/V/4/_ to specify the required setting, and then press ENTER.
Appendix • Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal. Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. Before attaching/detaching the stand ,, Before performing work, make sure to turn off the TV. Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. 1 2 o y--:: Unfasten _} , _ the four screws c-- / used to secure the stand in place.
Appendix Problem Possible Solution o No power o Check if you pressed TV POWER on the remote control unit. =_Page 14 If the indicator on the TV does not light up, press POWER on the TV. o Is the AC cord disconnected? _ Page 7 o Has the power been turned on? ,,_Page 14 o Unit cannot be operated, o External influences such as lightning, static electricity, may cause improper operation.
Appendix item Model: LC-40LET00UN 40" Class (40" Diagonal) Advanced Super View & BLACK TFT LCD LCD panel Resolution 2,073,600 TV-standard (CCIR) TV Function Model: LC-46LE700UN Receivi ng Channel 46" Class (45 63/64"Diagonal) Advanced Super View & BLACK TFT LCD Model: LC-52LE77UN 52" Class (52 _/3/' Diagonal) Advanced Super View & BLACK TFT LCD pixels (1,920 x 1,080) American TV Standard ATSC/NTSC System VHF/UHF VHF 2-13ch, UHF 14-69ch CATV 1-135ch (non-scrambled channel only) Digital Terre
Appendix m Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties. m Software developed by SHARP and open source software The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws.
Calling for Service For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
Dimensional Drawings Unit: inch (mm) LC=40LE700UN 37 61/64 (964) ± 34 O4 59/64 (887 8)i co L J OJ 18 1/2(470) A 11 13/16 3 29/32 (99) 3 41/64 (92.5) 3 41/64 I 1311/32 (_84.6) AN=37AG2 + LC=46LE700UN AN=37P30 43 9/32 (1099) _q i f l.
Dimensional Drawings Unit: inch (mm) LC=52LE700UN 48 s/4 (1238) I i _°_'11_7°' _ I t v J_ [ o I _ e/ / [ h J _.2231J_t_71/.
SHARP SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORATION Printed in Mexico Imprime au Mexique Impreso en Mexico TINS-E262WJZZ 09P07-MX-NM
