MODEL LC-60LE835X LC-52LE835X LC-46LE835X LC-40LE835X LCD COLOUR TELEVISION OPERATION MANUAL LC40LE835_book.
LC40LE835_book.
OPERATION MANUAL ENGLISH ENGLISH Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read Important safety precautions carefully before using this product. Contents Introduction................................................................. 3 Precautions For Daily Use ....................................... 3 Important safety precautions...................................
Enjoying 3D image viewing...................................... 64 Display format for 3D and 2D images ................... 64 Viewing 3D images ............................................... 65 Receiving a 3D image signal that can be detected automatically ................................... 65 Switching 3D to 2D mode ................................ 65 Receiving a 3D image signal that cannot be detected automatically ................................... 65 Watching 2D images in 3D .........................
Introduction Precautions For Daily Use Observe the following items Maintenance of the cabinet • When cleaning the cabinet, use a soft cloth (made of cotton, floss, etc.) to clean gently. • Do not use a dry or damp rag mixed with chemicals, as this could cause the ingredients of the cabinet body to deteriorate or crack. • Be careful not to use an abrasive cloth for cleaning or clean with excessive force, as this could scratch the surface of the cabinet.
Introduction • Do not place vases or any other water-filled containers on this product. The water may spill onto the product causing fire or electric shock. • Stand — Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product.
Introduction Supplied accessories Remote control unit ( x 1) “AAA” size battery ( x 2) AV cable ( x 1) Pages 10 and 12 Page 10 Page 27 Stand unit LC-60LE835X Page 8 LC-52/46LE835X Page 7 LC-40LE835X Page 7 Cable tie ( x 1) 3D glasses accessories Operation manual Page 9 Optional accessories The listed optional accessories are available for this LCD colour TV. Please purchase them at your nearest shop. • Additional optional accessories may be available in the near future.
Preparation Protection against overturning There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following tipresistant measurement for your safety. Anchoring the TV to the wall or a pillar 1 Affix the TV to the wall or a pillar using View from the top extra strong ties and cup hooks. n o Wall Cup hook (commercially available) Tie (commercially available) Fixing the TV to the table Place the TV on the table.
Preparation 4 Attaching the stand unit – 52/46/40LE835X Insert and tighten middle screws into the holes on the rear of the TV. • Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged. Middle screws CAUTION • Attach the stand in the correct direction. • Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over. 1 Confirm that there are screws with the stand unit.
Preparation Attaching the stand unit – 60LE835X • Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged. 5 Attaching the stand cover. 1 2 CAUTION Short screws • Attach the stand in the correct direction. • Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over. 1 Insert the stand cover. Insert and tighten two short screws into the holes of the stand cover.
Preparation 4 Connecting the TV Bundle the cables. 1 2 Insert the clip into the hole on the TV. Bundle the cables. Notes on installing the TV • Avoid direct sunlight and place the TV in a well-ventilated location. • Place the TV in a level location. • Do not turn on the power of the TV before connecting the AC cord. 1 Connect the antenna cable.
Preparation Using the remote control unit Inserting the batteries Before using the TV for the first time, insert two supplied “AAA” size batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries. 1 Open the battery cover. 2 Insert the two supplied “AAA” 3 Close the battery cover. size batteries. • Place batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.
Part names and functions TV (front view) Illumination LED*1 3D infrared emitter*2 OPC sensor*3 Remote control sensor *1 *2 *3 3D mode: Blue illumination 2D mode: White illumination This panel emits infrared signal towards the 3D glasses you wear when viewing 3D images. Do not place anything between the 3D infrared emitter on the TV and the infrared receiver on the 3D glasses. Refer to page 68 for details.
Part names and functions Remote control unit 1 2 MENU 16 17 9 10 18 3 11 4 5 12 6 13 14 7 19 8 9 20 21 15 10 11 12 22 23 16 13 24 17 14 15 25 18 26 27 19 20 1 2 3 4 5 6 7 8 POWER (Standby/On) To switch the power on and off (Page 16). ATV (Analogue TV) Press to access analogue TV mode (Page 17). DTV (Digital TV) Press to access digital TV mode (Page 17).
Quick guide What is the HOME? You can easily launch to enjoy Internet connection and Home network function and to perform settings for the TV from this “HOME” screen. Basic operation Display the HOME screen Exit the HOME screen Press HOME and the “HOME” screen displays. The operation will exit the “HOME” screen if you press B before it is completed. Select an item Selecting in the HOME. Press a/b/c/d to select the desired service or menu, and then press A.
Quick guide Using software keyboard Use the software keyboard when you need to input text. Char.Set Caps Done Clear Cancel Delete Cursor Left 1 2 3 4 5 Char. Set Changes character set into the alphabet, numbers, symbols, etc. Caps Changes characters to capital/lower case. Done Confirm the entry. Cancel Abort input and close the software keyboard. R/G/Y/B (Colour) buttons Selects the coloured items on the screen. Caps 6 7 8 Char.Set Input cursor Press c/d to move the cursor when highlighted.
Quick guide Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another. Confirm the following before turning on the power E Is the antenna cable connected? E Is the AC cord plugged in? 1 Press POWERa on the TV. • The initial auto installation wizard appears.
Watching TV Daily operation Turning on/off the power – using the TV front panel Turning on/off the power 1 Turn on the power. Press POWER a on the TV (after a few seconds, an image appears with sound). • Wait more than five seconds until you press POWER a on the TV after inserting the power plug. 2 Turn off the power. Switch it off by pressing POWER a on the TV. Turning on/off the power – using the remote control unit Standby mode 1 To standby mode.
Watching TV Switching between digital and analogue broadcasts Programme information (DTV) Option Watching digital broadcasts Watching analogue broadcasts Programme info. While watching DTV you can check the extended programme information on the screen using INFO on the remote control. Programme guide (CH list) MENU You can check the current schedule of DTV events and view detailed information about current events. 001 DTV TV1 SD Moving 20:00 - 21:00 HProgramme info.
Watching TV Switching the digital audio format If multi sound modes are received, each time you press MPX the mode switches as follows. Bilingual mode STEREO Audio (ENG) L/R When receiving a bilingual signal Each time you press MPX, the mode switches among NICAM CH A, NICAM CH B, NICAM CH AB and MONO. L R ATV LR ATV CH A Audio (ENG) CH A CH B CH A CH B CH AB ATV Audio (ENG) MONO MONO Press c/d to select L or R sound when the STEREO or DUAL MONO screen is displayed.
Watching TV Teletext View setting Text language What is teletext? Teletext broadcasts pages of information and entertainment to specially equipped TV. Your TV receives teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programme previews are among the many services available. Turning teletext on/off 1 2 3 Select a TV channel or external source providing a teletext programme.
Watching TV View setting Initial teletext page If you set the language of the initial page (this page is displayed for the first time after pressing m) for teletext in DTV mode, it will start from the selected language page. 1 Go to “HOME” > “TV Menu” > “Setup” > “View setting” >“Individual setting” > “Initial teletext page”. 2 Press a/b/c/d to select the desired language, and then press A. NOTE • This function is available for teletext in DTV mode.
Watching TV Option EPG EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule of DTV/ RADIO/DATA, view detailed information about them, tune to an event currently on-air. Useful settings for using EPG Basic setting Genre icon setup You can grey out or place a mark on desired genres and smoothly search for programmes you frequently watch. 1 Go to “HOME” > “TV Menu” > “Setup” > “Option” > “EPG setup” > “Genre icon setup”.
Watching TV Selecting a programme using EPG Basic operation E Display the EPG screen Today EPG [DTV-TV] Press EPG. 001 TV1 20:00 - 21:00 [Sat]2 [Sun]3 [Mon]4 [Tue]5 [Wed]6 [Thu]7 [Fri]8 [Fri] 1/4 20:00 SD Moving 20 21 22 23 0 1 TV1 001 SD Moving SD Moving TV2 002 HD ColorBar HD ColorBar TV3 003 H264 SD-Color P...
Watching TV 4 Search a programme in a category 1 2 3 Press G. Press a/b to select the desired genre, and then press A. Press a/b to select a programme you want to watch, and then press A. EPG [DTV-TV] Today [Sat]2 [Sun]3 [Mon]4 [Tue]5 [Wed]6 [Thu]7 [Fri] 1/4 20:00 [Fri]8 Search by genre [Today] 1 12-0 [Sat] 2 0-12 [Sat] 2 12-0 [Sun] 3 0-12 Movie News Entertainment Sports Children’s Found no programme by the genre.
Watching TV Timer setup using EPG You can switch to a programme at a set time. Press EPG. Press a/b/c/d to select the programme you want to set, and then press A. 1 2 Programme info. Back to EPG Next Watch 3 No Press c/d to select “Watch”, and then press A. • If you select “No”, the TV returns to the EPG screen. 4 Press c/d to select “Yes”, and then press A. • The selected TV programme is marked with an icon. 5 Press A to select “Back”. Cancelling the timer setup 1 2 3 4 Press EPG.
Connecting external devices E Before connecting ... • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or terminals. • Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible audiovisual quality to maximise the potential of the TV and the connected device. • Refer to page 60 for connecting a PC to the TV.
Connecting external devices DVI/HDMI conversion Video connections Using a DVI/HDMI cable, the digital video signals of a DVD can also be played via the compatible HDMI connection. The sound must be fed in additionally. HDMI connection • When connecting a DVI/HDMI cable to the HDMI terminal, the image may not come in clearly. • Both HDMI and DVI use the same HDCP copy protection method.
Connecting external devices Y PB (CB) PR (CR) VIDEO connection Component connection Example of connectable devices Example of connectable devices E VCR E DVD player/recorder E E E E You will enjoy accurate colour reproduction and high quality images through the INPUT3 terminal when connecting a DVD player/recorder or other device.
Connecting external devices NOTE Audio connections Speaker/amplifier connection Connect an amplifier with external speakers as shown below. E Connecting an amplifier with digital/ analogue audio inputs • Optical digital audio will be output in 2-ch stereo when it is from the external equipment connected to the TV using an HDMI cable. • If the image is not in sync with the audio, check the settings of the connected surround system.
AQUOS LINK Controlling HDMI devices using AQUOS LINK E What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/recorder) using a single remote control unit. By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AV amplifier using the remote control of the TV.
AQUOS LINK AQUOS LINK connection First connect the AQUOS AUDIO speaker system or an AQUOS BD player/AQUOS recorder that supports the HDMI CEC protocol. NOTE • Refer to the operation manual of the device to be connected for further details. • After unplugging connection cables or changing the connection pattern, turn on the power of the TV after all relevant devices’ power have been turned on.
AQUOS LINK AQUOS LINK menu Go to “HOME” > “TV Menu” > “Link operation” > select the menu you want to set. Link Operation Recorder power on/off Top menu/title list Setup menu Media change Recorder EPG Description • Refer to the operation manual of the recorder for details. This section explains how to play back a title in the AQUOS BD player/AQUOS recorder. Press MENU to hide the menu screen to operate a/b/c/d buttons. Select the title with a/b/c/d, and then press I.
Basic adjustment NOTE Picture settings *1 Go to “HOME” > “TV Menu” > “Setup” > “Picture”. Menu Setup CH list :Enter :Exit *2 “PC” is available only when selecting “HDMI1”, “HDMI2”, “HDMI3”, “HDMI4” or “PC” from the “INPUT” menu. “x.v.Colour” is available only when accepting an “x.v.Colour” signal through an HDMI terminal. • You can select a different “AV mode” item for each input mode (for example, select “STANDARD” for TV input and “DYNAMIC” for VIDEO input).
Basic adjustment NOTE Picture Advanced This TV provides various advanced functions for optimising the picture quality. Go to “HOME” > “TV Menu” > “Setup” > “Picture” > “Advanced”. • This effect is greater on fast moving images. • This function will have no effect in the following cases. 1) The type of signal received is a PC signal. 2) An OSD is being displayed. 3) Teletext is activated. • If images appear blurred, set to “Off”. Quad pixel plus Reproduces high-definition images with higher resolution.
Basic adjustment Audio settings Audio Surround Go to “HOME” > “TV Menu” > “Setup” > “Audio”. Menu CH list :Enter Setup This function produces a surround effect from the speakers. :Exit Item Audio STANDARD 3D Hall Reproduces a concert hall experience with realistic live surround sound based on reverberant sounds measured in a concert hall. 3D Movie Reproduces a movie theater experience with realistic live surround sound based on reverberant sounds measured in a movie theater.
Basic adjustment Power save settings ECO No signal off Go to “HOME” > “TV Menu” > “Setup” > “ECO”. Menu CH list :Enter Setup :Exit When set to “Enable”, the TV will automatically enter standby mode if there is no signal input for 15 minutes. NOTE • Even if a TV programme finishes, this function may not operate because of interference from other TV stations or other signals.
Basic adjustment 3 Channel settings Go to “HOME” > “TV Menu” > “Setup” > “View setting”. The “Digital setting” screen displays, and then press A. Press a/b to select the desired menu item, and then press A. Press c/d to select “Yes”, and then press A. 4 5 Menu CH list :Enter Setup Additional search :Back View setting Auto installation Use this menu to add new services automatically after “Auto installation” has been completed.
Basic adjustment Analogue setting Sound sys. 1 2 Repeat steps 1 and 2 in Digital setting. The “Analogue setting” screen displays, and then press A. 3 Repeat steps 4 and 5 in Digital setting. NOTE • The “Analogue setting” menu is available only for watching TV in ATV mode. Additional search Use this menu to add new services automatically after “Analogue search” in the “Auto installation” menu has been completed. • Start searching channels after selecting the colour system and sound system.
Useful viewing functions TV Start-up time setting View setting NOTE • To view a locked channel, you must enter the password (see page 37 for locking channels password). When you select a locked channel, a password prompt message pops up. Press C to display the password input window. E Deleting the password Quick start You can reduce the TV’s start-up time after turning on the power with the remote control unit. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Quick start”.
Useful viewing functions Individual setting – Time View setting Time display E Switching the multi audio languages Each time you press MPX on the remote control unit, the audio language switches. NOTE • This function depends on audio language information from broadcasters. • If audio for the selected language is not included in a received broadcast, audio will not be output for that language. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Time display”.
Useful viewing functions Item (for SD [Standard-Definition] signals) Optional features settings Normal Keeps the original aspect ratio in a full screen display. Zoom 14:9 For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and bottom with some programmes. Panorama In this mode, the picture is stretched toward each side of the screen. The picture may appear similar to “Full” depending on broadcast signals. Full For 16:9 squeeze pictures.
Useful viewing functions Skipping specified inputs Option 4:3 mode Option The “WSS” signal has 4:3 auto-switching that allows you to select between “Normal” and “Panorama”. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “4:3 mode”. Item Panorama Wide image without side bars. Normal Normal range keeping 4:3 or 16:9 aspect ratio. Input skip This setting allows you to skip the inputs on the input source selection operation.
Useful viewing functions Option Option Input label Headphone/Audio out select You can label each input source with a custom description. 1 Press INPUT to select the desired input source from the “INPUT” menu, and then press A. 2 Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input label”. 3 Select each character of the new name for the input source with using the software keyboard (page 14). 4 Repeat the above until the name is fully spelt out, and then press MENU.
Useful viewing functions Option Channel selecting effect This function shows a screen effect when choosing or changing channels. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Screen effect” > “Channel selecting effect”. Option Programme title display This function allows you to display programme information such as the title and airtime by tuning a channel. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Screen effect” > “Programme title display”.
Useful viewing functions Additional features Option Key lock Option Illumination This function makes the LED on the front of TV illuminated in several ways. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Illumination”. Item Off* The LED is not illuminated. Standby* The LED is illuminated while the TV is in standby mode. Watch The LED is illuminated while you watch TV. Always The LED is illuminated all the time. * After you select “Off” or “Standby”, press c/d to select “Yes” and then press A.
Network function Connecting to the network E How to connect Router To enjoy internet services, you need to connect the TV to a router with a high speed connection to the internet. You can also connect the TV to your Home network server through a router or access point. The TV connection to the router can either be wired or wireless. NOTE • If you choose a wired connection to the router, you need an ETHERNET cable (commercially available).
Network function Wireless installation Use the wireless LAN USB adapter (optional accessory). 7 8 E Wireless connection overview Press c/d to select “Change”, and then press A. Press a/b to select “WPS”, and then press A.
Network function Specifications (Wireless LAN USB adapter) Product name 802.11n Dual Band WLAN adapter Standard IEEE 802.11a/b/g/n Host interface USB Frequency band 2412f2484 MHz 5150f5850 MHz Security Static WEP (64/128 bit, key index 1 only) WPA-PSK (TKIP) WPA2-PSK (AES) Modulation DBPSK@1 Mbps DQPSK@2 Mbps CCK@5.5/11 Mbps BPSK@6/9 Mbps QPSK@12/18 Mbps 16-QAM@24 Mbps 64-QAM@48/54 Mbps and above, Rx up to 300 Mbps Transmit power and sensitivity Tx output power: (Typical) 2.
Network function Using the skype Welcome to skypeTM You can enjoy video calls on your AQUOS. E How to start skype NOTE Using AQUOS.NET By connecting the TV to the Internet, you can enjoy a variety of broadband content. 1 2 • A broadband Internet connection and network function are required to enjoy video calls. 1 Press HOME to display the “HOME” screen. Press a/b/c/d to select “AQUOS.NET” service, and then press ENTER. HOME LAN Buy a communication camera.
Network function 4 Press a/b/c/d to select a function, and then press ENTER. Selected item Description Displays the AQUOS.NET Top page. You can clear browser setting, which includes cookies, bookmarks and caches. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Clear browser setting”. NOTE Returns to the previous page. • Password input is required when executing “Clear browser setting” if Password is set. Goes back to the original page when you have viewed the previous page.
Network function DISCLAIMERS This Sharp device facilitates the access to content and services provided by third parties. The content and services accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such third party content and services must be in accordance with any authorization or terms of use provided by such content or service provider. Sharp shall not be liable to you or any third party for your failure to abide by such authorization or terms of use.
Other useful features NOTE Using a USB device The TV provides you some functions using a USB device. You can select which function to use after inserting a USB device in the USB port, and the TV starts the settings for each function. USB usage E Storage device for time shift E USB media to enjoy photos, music and videos • When you have inserted two or more USB storage devices in the ports, an error message appears. Insert only one USB storage device for time shift.
Other useful features NOTE Time shift This function enables you to pause the digital TV programme you are watching and start watching it again from the paused scene. 1 Press READY. • The TV starts temporary recording of the real time broadcast in the background. 2 Press I. • The TV shows the programme from the scene that the TV started recording and the recording carries on. • When the TV again playbacks after once pressing H to stop the programme, the TV shows the programme from the stopped scene.
Other useful features Examples of time shift usage When you move away from the TV for a while (press READY when you move away from the TV) Display information regarding time shift Channel display Channel information displays by pressing DISPLAY on the remote control unit. Without time shift Away You miss the scene while you are away.
Other useful features Option Option Auto input selection Device check You can choose whether or not to switch the input source automatically when receiving an AQUOS LINK compatible signal on the TV during time shift operations. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Time shift setting” > “Auto input selection”. Item Enable Release time shift when receiving an AQUOS LINK compatible signal. Switch input source automatically. Disable Time shift continues to work.
Other useful features USB media/Home network USB media/Home network Selecting modes and drives/servers 1 In both modes, you can enjoy viewing photos, listening to music and watching videos from external USB devices (USB Memory, USB card reader (Mass Storage Class), USB HDD) or Home network server. NOTE USB media mode (Example) 1 • To connect a Home network server, refer to Network function (Pages 45 and 46). • Some USB devices may not work properly for this function.
Other useful features 3D mode Photo mode You can view photos in 3D mode. Press B to display the “USB media menu” screen. Press a/b to select “3D display”, and then press A. Viewing thumbnails 1 2 • See pages 64 to 68 for details on the 3D function. NOTE • In 3D mode, you cannot rotate the photos. • You can select “3D display” from “USB media menu” only when the thumbnails screen for the photo mode in USB media mode is displayed on the screen.
Other useful features E Slide show Slide show Buttons for slide show operation (When using USB media mode) E Selecting the BGM Setup the slide show BGM from “Select slide show BGM” by pressing B when selecting photo thumbnails. This function is available only for the USB media mode. Buttons Description C Return to the previous operation. 3D Switch between 2D and 3D modes. DISPLAY Reveal/hide the guide display. B button Display the “USB media menu”.
Other useful features Buttons Video mode 16 Files 8 Files 15 Files 15 Files Buttons C 3D Switch between 2D and 3D modes. R button Start playback from the previously stopped scene.*1 G button Stop a video. Y button Display the USB control panel. B button Display “USB media menu”. • Title (edition) • Chapter • Show video information • USB device removal 0–9 Jump to scenes at 10% increments (0%–90%). • Limited to files without chapters. DISPLAY Reveal/hide the guide display.
Other useful features USB device compatibility Selecting the picture size for video mode You can select the picture size in “Video mode”. Select “Video mode”. USB device USB memory, USB card reader (Mass Storage class), USB HDD • Refer to Selecting modes and drives/servers on page 55. File system FAT/FAT32/NTFS Press WIDE. Photo file format JPEG (.jpg) (DCF2.0 compliant), MP (.mpo) (CIPA DC-007) Music file format MP3 (.
Connecting a PC Connecting a PC Displaying a PC image on the screen HDMI connection Selecting the picture size PC HDMI 1, 2, 3 or 4 terminals n You can select the picture size. 1 Press WIDE. • The “Wide mode” menu displays. 2 Press WIDE or a/b to select the desired item. EXAMPLE HDMI-certified cable PC HDMI 2 terminal* Input signal o 1024g768 1360g768 p DVI/HDMI cable φ 3.5 mm stereo minijack Normal Keeps the original aspect ratio in a full screen display.
Connecting a PC Adjusting the PC image automatically Adjusting the PC image manually Option Option Fine sync. Auto sync. This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI/RGB conversion cable, etc. 1 Press INPUT to select “PC” from the “INPUT” menu, and then press A. 2 Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “PC signal setting” > “Auto sync.
Connecting a PC PC control of the TV • When a programme is set, the TV can be controlled from the PC using the RS-232C or IP. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. • Use an RS-232C serial control cable (cross type), ETHERNET cable (commercially available) or wireless LAN USB adapter for the connections.
Connecting a PC Command list CONTROL ITEM POWER SETTING COMMAND PARAMETER CONTROL CONTENTS E 0 _ _ _ TOGGLE MUTE R 0 _ _ _ POWER OFF (STANDBY) M U T E 1 _ _ _ I T G D _ _ _ _ INPUT SWITCHING (TOGGLE) M U T E 2 _ _ _ MUTE OFF C S U 0 _ _ _ SURROUND TOGGLE MUTE I T V D _ _ _ _ ATV (CHANNEL FIXED) A I D T V _ _ _ _ DTV (CHANNEL FIXED) A C S U 1 _ _ _ SURROUND TS HD ON INPUT 1_3 (1f3), HDMI 1f4 (4f7), PC (8) A C S U 2 _ _ _
Enjoying 3D image viewing You can use special 3D glasses to watch 3D-supported images on this TV. • You can enjoy 3D movies on this TV by viewing the movie through 3D glasses, sold separately. • To produce 3D images, liquid crystal shutters in the 3D glasses alternately open and close imperceptibly fast to exactly match alternating left and right video images displayed by the TV. • Not all consumers can experience and enjoy 3D TV.
Enjoying 3D image viewing Viewing 3D images 3 Take off the 3D glasses and turn off the power of the 3D glasses. • Press the power button for at least two seconds. • The LED light lights for two seconds. NOTE • If the input signal switches to 2D, 2D images are displayed automatically. • 3D mode is canceled automatically when the setting is changed, input source is changed, the input signal resolution is changed or the power is turned off.
Enjoying 3D image viewing Watching 2D images in 3D You can convert normal 2D images into 3D images. 1 Press 3D. 2 Press c/d to select “2D s 3D”, and then press A. 3 Turn on the power of the 3D glasses, and then wear the 3D glasses. NOTE • The confirmation message to select either 3D or 2D mode is displayed on the screen once per hour. • When the TV converts normal 2D images into 3D images, you can display the “2D s 3D convert effect” menu to adjust the convert effect by pressing Y.
Enjoying 3D image viewing 3D still image effect adjustment 3D setup E Basic operation Go to “HOME” > “TV Menu” > “Setup” > “Option” > “3D setup” > select the menu you want to set. 3D auto change This function allows the TV to switch to 3D mode automatically when a 3D identification signal is detected. Item Yes When a 3D signal is detected, the TV switches to 3D mode automatically. No Automatic change is not performed. NOTE • 3D signals may not be detected depending on the signal format.
Enjoying 3D image viewing Troubleshooting – 3D Images Problem Possible solution • 3D images are not displayed. • Is “3D auto change” set to “No”? Press 3D to switch to 3D mode. • If “3D auto change” is set to “Yes” but no 3D images are displayed, check the display format of the content being viewed. Some 3D image signals may not be recognized as 3D images automatically. Press 3D to select the appropriate display format for the 3D image.
Appendix Troubleshooting Problem Possible solution • No power. • Is the AC cord disconnected? • Check if you pressed POWER a on the TV. • When the power switch does not work, remove the power plug and insert it again, and press POWER a on the TV after waiting more than five seconds. • The TV cannot be operated. • External influences such as lightning, static electricity, etc., may cause improper operation.
Appendix Reset If complex adjustments are made so that the settings cannot be restored to normal, you can reset the settings to the factory preset values. 1 Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Reset”. 2 If you have already set the password, enter it here. 3 Press c/d to select “Yes”, and then press A. Updating your TV via DVB-T Ensure that your TV software version is always up to date. From time to time SHARP will make updated TV base software and DVB software available.
Appendix Getting information Updating your TV via USB/Network Information Information Message list Software update When new software is detected, you can confirm the update information and download the software from “Message list”. Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Message list”. NOTE This function allows you to update to the latest software using a USB device or Network. 1 Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Software update” > “USB update”.
Appendix Information on the software licence for this product Software licence You can read the software licences in this menu. Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Software licence”. E Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.
Appendix Specifications Item LC-60LE835X 1,920 x 1,080 x 4 dots Video colour system PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 TV-standard Receiving channel Analogue PAL ( B/G, D/K, I), SECAM ( B/G, D/K, K/K1), NTSC:(M) Digital DVB - T VHF/UHF 44.25-863.25 MHz TV tuning system STEREO/BILINGUAL LC-40LE835X Auto preset 02ch/07ch/09ch/10ch/28ch at Australia. NICAM ( B/G, I, D/K), A2 stereo (B/G), BTSC Audio amplifier 10 W x 2, 15 W x 1 (Woofer) Speaker (8.5 cm x 1.5 cm) x 2, φ 9.
Appendix LC-60LE835X Removing the stand 1 Loosen the two screws used to secure the stand cover. 2 Remove the stand. 1 Unfasten the four screws used to secure the stand in place. 2 Remove the cover. For wall mounting with the optional bracket (AN-37AG2 + AN-37P30 or AN-52AG4) remove the stand. Before setting TV on the wall • Remove the connected cables (DVD, VCR, etc) from the terminals. • Before performing work, make sure to turn off the TV.
Appendix Mounting the TV on a wall To use this TV mounted on a wall, remove the AC cord holder and the screws at the 4 locations on the rear of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV. 1 2 1 • This TV should be mounted on a wall only with the wall mount bracket and attachment* available from SHARP (Page 5). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
Appendix Dimensional drawings LC-60LE835X 26.4 *2 33.4 *3 1383 41 *4 160 486 747.63 *1 839 536 366 400 145 444 400 52 230 10° 383 888 1329.12 *1 215 208 101 AN-52AG4 LC-52LE835X 26.4 *2 33.4 *3 1206 41 *4 131 436 293 507 400 400 400 19 298 180 20° 109 648.0 *1 738 787 1152.0 *1 215 101 312 AN-52AG4 *1 *2 *3 *4 Active area Thinnest part Excluding projecting part Including projecting part NOTE • Dimensions do not include protrusions such as screws and some parts.
Appendix Dimensional drawings LC-46LE835X 26.4 *2 33.4 *3 1072 41 *4 131 398 572.67 *1 663 293 507 400 365 400 19 262 200 20° 78 711 1018.08 *1 215 101 301 AN-52AG4 LC-40LE835X 26.4 *2 33.4 *3 938 41 *4 116 360 460 264 300 328 300 65 231 124 19° 20° 50 498.15 *1 588 636 885.
Appendix CLEARING THE PASSWORD 1 2 3 Go to “HOME” >“TV Menu” > “Setup” > “View setting” > “Individual setting” > “Password”. The password input screen displays. Press and hold both CHr and VOL+ on the TV simultaneously until the message appears on the screen. NOTE • To set the password again, refer to Password on page 38 and follow the instructions. The Password is . NOTE • As a precautionary measure, make a note of your password above, remove it from this manual, and keep it in a familiar place.
Memo 79 LC40LE835_book.
Memo 80 LC40LE835_book.
FOR LOCATION ENQUIRIES WITHIN AUSTRALIA REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.sharp.net.au OR CALL SHARP CUSTOMER CARE 1300 135 022 (LOCAL CALL COSTS APPLY WITHIN AUSTRALIA) SHARP CORPORATION OF AUSTRALIA PTY LTD FOR LOCATION ENQUIRIES WITHIN NEW ZEALAND REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.sharp.net.
Printed in Malaysia TINS-F342WJZZ 11P10-MA-NP LC40LE835_book.
