FACSIMILE Operation Manual FO-1470

Setting Up and Using OpenLCR

Registering by fax

To register by fax, fill in the Fax Transmission Test and OpenLCR

Line Activation Form, and then fax the form as follows:

Place the form with the side you

wrote on face down, and push it

gently into the document feeder of the

fax machine.

The display will show:

READY TO SEND

Press the OpenLCR key, the 5 key,

and then the START key.

• Your fax automatically calls

OpenLCR and sends the form. After

the form is sent, your fax will

automatically receive the rate data.

This lasts one or two minutes. When

downloading is completed, the display

will briefly show DOWNLOAD OK!!

and then revert to the date and time.

Your fax will print out the registration

form to confirm that it was received.

• OpenLCR will also program the date

and time and your fax number in your

fax machine.

OpenLCR

be able to respond automatically to OpenLCR’s call to notify your

fax that it must receive new rate data. If this occurs, old, incorrect

data will continue to be used.

♦ Please note that the agreement you enter into by registering is

between you and OpenLCR; it is not between you and any carriers.

OpenLCR service is only available in the U.S.A..

START

all-ux510A.book Page 32 Thursday, September 14, 2000 9:05 AM