Specifications

Sending a Fax by Automatic Dialling

Automatic redialling

If you use auto dialling (including Direct Keypad Dialling) to send a fax and the

line is busy, the machine will automatically make three redial attempts at

intervals of five minutes.

During this time, [RECALLING] will appear in the display, followed by the

attempt number.

♦ To clear the message and stop automatic redialling, press . If there

are multiple fax numbers being automatically redialled, only the number

that was attempted first will appear in the display. To cancel automatic

redialling of a different number, see Checking and cancelling stored fax

jobs on page 67.

Under certain conditions, automatic redialling may stop before three redialling

attempts are made.

STOP

Using the REDIAL key

To redial the last number dialled on the machine, press . The speaker

will be automatically activated. To fax a document, press when you hear

the fax tone after the other machine answers.

REDIAL

START

3 Check the display. If the number shown is correct, press .

• If the number is not correct, press to clear the incorrect digits, and

then re-enter the correct digit(s).

START

STOP