Specifications

Setting Up the Multifunction Interface
25
1. Installation
Installing the Multifunction software
Minimum system requirements
Processor: Pentium 90 MHz or higher
Operating system:
Windows
95/98, Windows NT
4.0
(Service Pack 3 or later), English version
Physical RAM: Windows 95/98: 16 MB
Windows NT 4.0: 32 MB
Free hard-disk space: Windows 95/98: 30 MB
Windows NT 4.0: 35MB
The Sharp Laser Multifunction software cannot be installed by Plug
and Play. If the
New Hardware Found
box appears when you turn
on your computer, click the
Cancel
button to exit the dialog box.
If you have other multifunction device software installed in your
computer, uninstall that software before installing the Sharp Laser
Multifunction software. Otherwise, the Sharp Laser Multifunction
software may not function correctly.
1.
Insert the Sharp Laser Multifunction CD into your computer’s CD-
ROM drive.
2.
If the
Sharp Laser Multifunction Setup
window appears, click
Next
in the window and go to step 4. If the window doesn’t appear, click
the
Start
button on the Windows taskbar and select the
Run...
command.
3.
Type
e:\setup
in the
Open
text box, where
e
is the letter of your CD-
ROM drive, and then click
OK
.
4.
Follow the instructions that appear on the screen.
5.
When installation is completed, restart your computer.
all-fo2950hk.book Page 25 Wednesday, August 9, 2000 11:13 AM