Service manual

FO-4400U
FO-CS1
1 Copy protect switch On Off 0
2 Cut-off mode (when copy mode) Continue Cut-off 0 OPTION
3 Scanning ratio in memory input 1 : 1 Reduce 0 Memory scanning
4 Overseas communication mode selection function Yes No 0
SW75 5 Reserved 0
Reduce ratio when copy mode AUTO 100%
6 (Except notation: Setting prohibition) No. 6 0 1 Set up to 100% except the 1
7 No. 7 0 0 notation 0
8 No. 8 0 0 0
1 Reserved 0
2 Reserved 0
Density adjustment (when Fine/STD mode) Normal Faint Deep Deep (when Dark mode)
3 No. 3 0 0 1 1 0
SW76
4 No. 4 0 1 0 1 0
Density adjustment (when Half-tone mode) Normal Faint Deep Deep (when Dark mode)
5 No. 5 0 0 1 1 0
6 No. 6 0 1 0 1 0
7 MTF correction in half-tone mode On Off 1
8 MTF intensity in half-tone mode Strong Weak 0
1 Cassette define LTR/A4: Tray A4 LTR 0
2 Cassette define LTR/A4: Upper A4 LTR 0 When W cassette
3 Cassette define LTR/A4: Lower A4 LTR 0 Ignore when W cassette
4 Reserved 1
SW77 5 Reserved 1
6 Reserved 0
7 Reserved 0
8 Reserved 0
1 Reserved 1
2 Reserved 0
3 Reserved 0
SW78
4 Reserved 0
5 Reserved 0
6 Reserved 0
7 Reserved 0
8 Reserved 0
1 Secure billing code Yes No 0
2 Pause with SHIFT key Yes No 0 Only when special
billing code is given.
3 Reserved 0
SW79
4 Z key pause time Binary input 16 8 4 2 1 0 Only when the
5 (250ms unit) No. = 4 5 6 7 8 (Data No.) 0 special billing code
6 EX 00000 0 is given. The
7 eg. Pause time 250ms 0 ordinary pause is
8 Time=(n+1) x 250ms 0 not affected.
1 Separate feature On Off 0
2 Reserved 0
3 Reserved 0
SW80
4 Reserved 0
5 Addition of header (Sender information) On Off 1
6 DTMF sending by the panel test On Off 0
7 Power save mode Real time Timer 1
8 Reserved 0
SW
NO.
DATA
NO.
ITEM
Switch setting and function
Remarks
Initial
setting
10
2 – 23