Service manual

FO-4400U

FO-CS1

3 – 24

Fig. 18

1. Place the printer with its backside down.

2. Unhook the spring and remove the right-hand side of the Paper

Take-up Roller shaft from its bushing.

3. Remove the Paper Take-up Roller.

Paper take-up roller

(a)

(b)

(c)

Fig. 17

Print head unit (PH)

Paper empty sensor (PE1)

1. Unplug the connector from the Main Motor Unit and remove the

harness from the cord holder.

2. Unplug the connectors from the cord holder.

3. Remove the Print Head Unit (PH). (6 screws)

Fig. 19

1. Remove the sensor fixing bracket and remove the Paper Empty

Sensor. (1 connector)