Service manual
1 – 3
UX-470DE
FO-880DE/NX-670DE
ENTERING YOUR NAME AND NUMBER
Note: Imaging film and paper must be loaded to perform the following operation.
1. Press:
FUNKTION
3
Display shows: OWN NUMBER SET
2. Press:
START/SPEICHER
3. Enter your fax number (max. of 20 digits) by pressing the number keys.
♦ If you make a mistake, press the SEARCH/R key to move the cursor
back to the mistake, then enter the correct number or letter.
4. Press:
START/SPEICHER
5. Enter your name by pressing the appropriate number keys as shown below.
♦ To enter two letters in succession that require the same key, press the SPEAKER
key after entering the first letter.
6. When finished, press:
[5] Quick reference guide
INSTALLATION
1. Connect the handset as shown.
2. Plug the power cord into a earthed, 220 - 230 V outlet.
3. Plug one end of the telephone line into the TEL. LINE socket on the rear of the
fax, and the other end into your telephone wall socket.
RECORING AN OUTGOING MESSAGE
1. Press:
Display shows: OGM RECORDING
2. Press:
3. Press 1 (GENERAL) to record an outgoing message for the answering machine.
Press 2 (TRANSFER) to record an outgoing message for the Transfer function.
4. Pick up the handset and speak into it to record your message.
5. When finished, press the STOP key or replace the handset.
6. Press:
SETTING THE DATE AND TIME
Note: Imaging film and paper must be loaded to perform the following operation.
Press:
Display shows: DATE & TIME SET
Press the START/MEMORY key:
Enter two digits for the Day (01 through 31).
Enter two digits for the Month (01 through 12).
Enter four digits for the Year (Ex: 1999).
Enter two digits for the Hour (01 through 23).
Enter two digits for the Minute (00 through 59).
When finished, press:
STORING AND CLEARING NUMBERS FOR AUTOMATIC DIALING
Note: Imaging film and paper must be loaded to perform the following operation.
1. Press:
Display shows: FAX/TEL # MODE
2. Press 1 to store a number or 2 to clear a number.
3. Enter a 2-digit Speed Dial number (from 01 to 05 for Rapid Key Dialing, or 06
to 45 for Speed Dialing). (If you are clearing a number, go to Step 7.)
4. Enter the full telephone/fax number.
5. Press:
6. Enter the name of the location by pressing number keys (max. of 20 charac-
ters). (Refer to the letter entry table in ENTERING YOUR NAME AND
NUMBER.)
7. Press:
SENDING DOCUMENTS
TEL.
SET
TEL.
LINE
1
3
2
A =
B =
C =
D =
E =
F =
G =
H =
I =
J =
K =
L =
M =
N =
O =
P =
Q =
R =
S =
T =
U =
V =
W =
X =
Y =
Z =
SPACE =
KURZWAHL
WAHLWDH.
ALPHAWAHL
LAUTSPR.
ABC
DEF
JKL
MNO
GHI
TUV
WXYZ
PQRS
SYMBOLE
R
Deletes high-
lighted letter
Upper/lower
case shift key
Moves cursor
to the left
Moves cursor
to the right
Press either key one or more times to select
and enter a symbol.
START/SPEICHER
STOP
FUNKTION
3
START/SPEICHER
START/SPEICHER
STOP
FUNKTION
3
START/SPEICHER
START/SPEICHER
STOP
Place your document (up to 10 pages)
face down in the document feeder.
Normal Dialing
1. Lift the handset or press
2. Dial the fax number.
3. Wait for the reception tone (if a person answers, ask them to press their Start
key).
4. Press:
Rapid Key Dialing
Press the appropriate Rapid Key. Transmission will begin automatically.
Speed Dialing
1. Press:
2. Enter 2-digit Speed Dial number.
3. Press:
RECEIVING DOCUMENTS
Press:
FAX mode: The fax automatically answers and receives the incoming document.
TEL mode:
TEL/FAX mode: The fax machine automatically answers on 1 or 2 rings and re-
ceives faxes. Voice calls (including manually dialed fax transmissions) are sig-
nalled by a special ringing sound.
A.M. mode: Select this mode when you go out to receive both voice messages
and faxes.
LAUTSPR.
START/SPEICHER
KURZWAHL
START/SPEICHER
FAX
TEL
ANRUFB.
FAX
TEL
ANRUFB.
14 FEB 10:30
14 FEB 10:30
TEL/FAX
TEL/FAX
FAX
TEL
ANRUFB.
14 FEB 10:30
TEL/FAX
FAX
TEL
ANRUFB.
14 FEB 10:30
TEL/FAX
EMPFAMGSART
Fax
tone
RECEIVING
START/SPEICHER
FUNKTION
0
START/SPEICHER
STOP
STOP
1 – 9