Service manual

FO-IS125N
1 – 6
[4] Transmittable documents
1. Document Sizes
Use document carrier sheet for smaller documents.
• With special sizes, only one sheet can be fed into the machine at a
time. Insert next page into feeder as current page is being scanned.
2. Paper Thickness & Weight
3. Document Types
• Normal paper
Documents handwritten in pencil (No. 2 lead or softer), fountain
pen, ball-point pen, or felt-tipped pen can be transmitted.
Documents of normal contrast duplicated by a copying machine
can also be transmitted.
• Diazo copy (blue print)
• Diazo copy documents of a normal contrast may be transmitted.
• Carbon copy
A carbon copy may be transmitted if its contrast is normal.
4. Cautions on Transmitting Documents
• Documents written in yellow, greenish yellow, or light blue ink can-
not be transmitted.
• Ink, glue, and correcting fluid on documents must be dry before the
documents can be transmitted.
• All clips, staples and pins must be removed from documents before
transmission.
• Patched (taped) documents should be copied first on a copier and
then the copies used for transmission.
• All documents should be fanned before insertion into the feeder to
prevent possible double feeds.
5. Automatic Document Feeder Capacity
Number of pages that can be placed into the feeder at as follows:
Letter/A4: 30 sheets max. (20lb. paper)
Legal: 5 sheets max.
• Temperature: 50 ~ 86°F (10 ~ 30°C)
• Humidity: 25 ~ 85%
NOTE: • When you need to send or copy more pages than the
feeder limit, place additional pages in feeder when last
page in feeder is being scanned.
• Place additional pages carefully and gently in feeder. If
force is used, double-feeding or a document jam may
result.
6. Readable Width & Length
The readable width and length of a document are slightly smaller than
the actual document size.
Note that characters or graphics outside the effective document scan-
ning range will not be read.
• Readable width
8.2” (208mm), max
• Readable length
This is the length of the document sent minus 0.16”(4mm) from the
top and bottom edges.
Normal size Width 148 - 216 mm
Length 140 - 297 mm
Product specifications
Indication Lower Limit Upper Limit
Weight
indication
Metric system
indication
52g/m
2
80g/m
2
Thickness
indication
Metric system
indication
0.06mm 0.1mm
Document
size
Document size
Range
Minimum (148mm x 70mm)
A4 (210mm x 297mm)
Letter (216mm x 279mm)
Legal (216mm x 356mm)
Number of
ADF sheets
Document size
Weight
Minimum ~ Letter/A4 size 30sheets
Legal 5 sheets
More than 90 kg
Below 135 kg 1 sheet
Paper
quality
Kind Paper of fine quality/bond paper/
Kent paper
(Min.)
(Max.)
A4 size
(Max.)
140mm
297mm
356mm
70mm
[Special size]
216mm
[Normal size]
216mm
[Special size]
Readable widt
h
0.16"(4mm)
0.16"(4mm)
Readable length